Airvent Mixflow ECIF50W-150T Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Airvent Mixflow ECIF50W-150T. Airvent Mixflow ECIF50W-150T 2 stron.
Drukuj stronęBEFORE STARTING
Upon receipt, please check carefully whether the product is consistent with your order, the fan should be inspected in
case of any damage. Ensure the product specifications and product tags correspond to the correct power and voltage
standards of the country the fan is being used in.
Non ROT
Version
ROT
Version
INSTALLATION
Warning: The fan must be isolated from the power supply during installation and maintenance.
① Remove the fan body from the spigots that are
attached to the base by releasing the two retaining
clamps.
③ Re-mount the fan body in-between the spigots
by lining up the retaining clamps.
Hoops
Main
Hoops
Impeller
Duct
Frame
Insert 1
Insert 2
Spigots
Base plate
② Mount the base in the desired position using the
fasteners supplied
④ Tighten the two retaining clamps ensuring the
body is tightly fastened.
WIRING Diagram
—ECIF40W-150 / ECIF50W-150
Duct
This is a plug & go product, no further wiring is required.
For build-in ROT Fans only
WARNING
Please ensure colour code is followed When Wiring，incorrect Wiring will result in damaged ROT PCB
Board and will void warranty.
• Airvent Australia Pty Ltd warrants this product to be free of defects in material and workmanship for the applications specified in
the Owner's Manual for a period of one year from date of purchase.
• This warranty only applies to the original purchaser of this product.
• This warranty excludes damage, accidental or otherwise, to the unit not caused by a defect in material or workmanship.
• The warranty also excludes damage caused by misuse, tampering modification, misassemble, repairs, or alteration or failure to
adequately maintain and care for the unit. Operating this product under any conditions other than those recommended or at
voltages other than indicated will also void this warranty. For warranty issues, contact the place of purchase for repair/replacement
opportunities. The original date receipt or proof of purchase must accompany all returns.
One
• All warranties expressed or implied are limited for one year from the date of purchase. Airvent is a register trademark of AIRVENT
Year
AUSTRALIA PTY LTD. Unless prescribed by law, AIRVENT shall not be liable for any personal injury, property or any incidental or
consequential damage of any kind resulting from malfunctions, defects, misuse, improper assembly or installation, or alteration of
this product.
• For further warranty clarification, please visit our website on www.airvent.com.au or email us on [email protected].
WIRING Diagram
—ECIF40W-150T / ECIF50W-150T
Wall Plug
SUPPORT & LIMITED ONE-YEAR WARRANTY