Addictive Desert Designs Bomber Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Addictive Desert Designs Bomber. Addictive Desert Designs Bomber 10 stron. Front bumper for 2017-current ford superduty

Drukuj stronę

ADDICTIVE DESERT DESIGNS® ®

ADDICTIVE DESERT DESIGNS

14. Set the supplied Bumper Mounting Brackets in place on the vehicle. Then, install the supplied 9/16" Bolts

(2 per side), 9/16" Washers (4 per side), and 9/16" Lock Nuts (2 per side) in the top mounting holes. Install the

supplied 1/2" Hex Head Bolts (2 per side), 1/2" Washers (4 per side), and 1/2" Lock Nuts (2 per side) in the side

mounting holes. Install the supplied 1/2" Black Button Head Bolts (1 per side), Black 1/2" Washers (1 per side),

and Black 1/2" Lock Nut (1 per side) in the back mounting tab. (Fig K)

Install the 9/16" Bolts Here

Install the 1/2" Hex Head

Bolts Here

Fig K

15. Install the supplied 3/8" x 1 1/4" Hex Head Bolt (1 per side) with one regular washer (to be installed on the

bottom side of the mount) and one fender washer (to be installed inside the frame rail) in the bottom mounting

hole on the bumper brackets. (Fig L)

Fig L

Addictive Desert Designs® | Page 7

Install the bolt and normal

washer here

2017-Current Ford SuperDuty

Bomber™ Front Bumper Installation Instructions

Install the 1/2" Button

Head Bolt Here

Install the nut and fender

washer here