Danelectro Cool Cat V2 Drive CO-2 Instrukcje - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje dla Pedał muzyczny Danelectro Cool Cat V2 Drive CO-2. Danelectro Cool Cat V2 Drive CO-2 2 stron.

DRIVE

CO-2

Features

The Cool Cat CO-2 Drive pedal adds a healthy dollop of color

to guitar tones with plenty of crunch and bloom. It's very

responsive to touch as well as your guitar's volume and tone

controls; while it's thicker than the Transparent Overdrive, your

guitar's voice still comes through. This new version adds two

"under the hood" features: an Input Sensitivity control as well as

a DIP switch that lets you create Lo-Fi tones for an even wider

sonic palette.

CONTROLS:

DRIVE: Sets the amount of overdrive from minimum (fully

counter-clockwise) to maximum (fully clockwise). Higher

settings have higher distortion, volume, and low end bloom.

TONE: Adjusts the tone of the Drive, use to find your tonal

"sweet spot". Turn clockwise for brighter tones and counter-

clockwise for darker tones.

VOLUME: Controls the overall volume of the pedal from

minimum (fully counter-clockwise) to maximum (fully clock-

wise), with plenty of range to allow even low drive settings.

WARNING: This pedal has lots of volume, so start with your

amp and the Volume control turned down.

BYPASS: the true bypass footswitch engages and

disengages the pedal.

"UNDER THE HOOD" CONTROLS: (accessible in the

battery compartment)

INPUT SENSITIVITY: This trim pot (adjustable with a small

Phillips head screwdriver) adjusts the level of signal from your

guitar that goes into the Drive circuitry, from minimum (fully

counter-clockwise) to maximum (fully clockwise). You can

think of this control as a way to fine-tune your guitar and the

CO-2 Drive pedal, or as a way to determine what you want

the CO-2 to sound like at it's minimum Drive setting. Try

turning the Input Sensitivity down for guitars with a hot

output, and up for guitars with a low output. Notice that the

behavior of the Drive control is affected by the Input Sensitivity

setting: higher Input Sensitivity settings make the pedal more

distorted for a given Drive setting. This means you can also use

Input Sensitivity as an additional gain stage, for extreme

amounts of distortion. Experiment with setting a high Input

Sensitivity setting with a hot guitar, or a low Input Sensitivity

setting for a low output guitar.

LO-FI: This internal DIP switch takes the CO-2 into new terri-

tory – AM Radio style Lo-Fi. Tones. Use in conjunction with

the Tone control for further shaping of the Drive.