Danfoss AK-SC255 Instrukcja rozwiązywania problemów - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja rozwiązywania problemów dla Kontroler Danfoss AK-SC255. Danfoss AK-SC255 8 stron. Com-trol local bus support
Również dla Danfoss AK-SC255: Instrukcja instalacji (7 strony), Podręcznik użytkownika (10 strony)
Drukuj stronę
AK-SC255
For Danfoss Technical Support call +1-410-931-8716.
©Danfoss (USCO / MKS), 04- 2010
Troubleshooting Guide
Note: Before calling Danfoss Technical Support on any of the following concerns
please do the following: Power down the controller, check all wiring and cabling
connections (both screw terminals, Fig. 1 or plug-in connections, Fig 2. Check that
to see that the CPU card, Fig. 3 is firmly in place. If found to be unevenly seated
press firmly on its corners until it no longer moves. Finally, power up the unit and
recheck for the initial complaint. See diagrams below.
USCO.EI.RF0.D1.22 / 521U0152
Figure 1
Figure 2
Figure 3
5Vdc connection at
P1
A1 alarm relay
terminals and
RS485 terminals
High voltage input
power at MK1
LON terminals
Plug in connections
CPU card
With the power OFF,
re-seat by firmly
pressing on corners
3