Addison DC Series Instrukcja instalacji, obsługi i konserwacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Klimatyzator Addison DC Series. Addison DC Series 19 stron. High efficiency packaged air conditioning systems
Drukuj stronę
Note: Wiring - Consult the wiring diagram furnished with
the unit. These units are custom designed for each
INSTALLATION CONTINUED
Ductwork
Properly sized and installed ductwork is critical to reliable
performance of the unit and system. The DC Series B is
field convertible for down flow or left and right horizontal
supply and return duct connections. The DC Series B is
shipped from the factory with all duct connections capped
off. Simply remove the duct caps required for duct
installation. Unit connection sizes are in the engineering
specification literature. All ductwork must be installed
according to local codes, practices and requirements.
Industry manuals should be used as a guide to sizing and
designing the duct system.
Ducts passing through unconditioned spaces must be well
insulated with vapor barrier to prevent condensation.
Condensate Piping
A condensate trap must be provided by customer.
Drainage of condensate directly onto the roof is acceptable
if permitted by local codes. It is recommended that a small
drip pad of either stone, or tar, wood or metal be provided
to prevent any possible damage to the roof. If condensate
is to be piped into the building drainage system, the drain
line must penetrate the roof external to the unit. Refer to
local codes for additional requirements.
Figure 2
application. The unit wiring diagram is located inside the
control panel of each unit.
CAUTION: Units with high internal and external static
pressure drops will require a deeper trap. Use the
graph and table in Figure 2.
GAS PIPING AND VENTING
For DC units with gas furnace options locate the gas
furnace instruction manual located inside each gas
furnace vestibule. This manual will provide you with
specific installation requirements and important safety
and warning information that must be reviewed prior
to installation of the gas heating equipment.
WARNING
Gas-fired appliances are not designed for use in
hazardous atmospheres containing flammable vapors
or combustible dust, in atmospheres containing
chlorinated or halogenated hydrocarbons, or in
applications
with
airborne
Improper installation, adjustment alteration, service, or
maintenance can cause property damage, injury, or
death.
Read
the
maintenance instructions thoroughly before installing
or servicing this equipment.
WARNING
FOR YOUR SAFETY
The use and storage of gasoline or other flammable
vapors and liquids in open containers in the vicinity of
this appliance is hazardous.
silicone
substances.
installation,
operation,
and
5