3S TE200 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów 3S TE200. 3S TE200 20 stron.

③ Connecting the cables

To connect the cables, remove the terminal box cover and use the insulated crimping

terminals on the terminal block.

Connect by crimping the + input terminal to the + terminal (red) and the - input

terminal to the - terminal (blue). (See Figure 3-1)

* To remove the cover, undo the locking screw (hex set screw) .

External Earth Terminal

＋

Input Signal

－

Earth

④ Locking

After partially attaching the terminal box cover, lock the cover in place using the locking

screw.

⑤ Other details

All other aspects of the installation should be carried out in compliance with the "New

Guidelines for Industrial Electrical Equipment Explosion-Proofing 1979" issued by the

Industrial Safety Institute of the Ministry of Labor and in accordance with "technical

procedures that comply with international standards".

Locking Screw

Internal Earth Terminal

Figure 3-1

2-M4 Screw

3－4