Dulytek DHP5-E Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Dulytek DHP5-E. Dulytek DHP5-E 15 stron.

Drukuj stronę
Dulytek DHP5-E Instrukcja obsługi
INSTRUCTION MANUAL: DHP5
SAFETY PRECAUTIONS

HANDLING PRECAUTIONS

Dulytek Equipment
www.dulytek.com
(continued)
surruounding is dusty, humid, or oily, short-circuit may occur, causing a fire.
•
DO NOT remove the machine cover.
•
DO NOT disassemble the press or make any modifications to the
equipment.
•
The press must be operated on a hard, level surface, away from its edges
to prevent accidental tipping over.
•
Work area must be kept clean, tidy, and free of obstructions to the press
moving parts.
•
Always attach the power cord to the press first, then plug it into the wall
outlet.
•
To unplug the press, turn OFF the power switch, only then remove the plug
from the outlet.
•
DO NOT touch the press's hot surfaces. Use heat-resistant gloves or
tools. Care must be exercised as serious burns can occur from touching
hot platens.
•
Keep your hands and other body parts away from the moving parts to
prevent injury.
•
This press comes with a power cord that fits into a standard household
3-prong outlet (110V American market and 220V European market). DO
NOT attempt to use the equipment with a two-prong electrical cord or any
other way without proper grounding.
•
DO NOT exceed the rated capacity.
•
Contact DULYTEK at [email protected] if the equipment does not start or
if smoke or unusual odors are detected.
•
Always turn the machine OFF and unplug it when done using.
© 2020 Dulytek
All rights reserved
PAGE 4