AODELAN WM2 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Mikrofon AODELAN WM2. AODELAN WM2 12 stron.

connection.

9. USB-C terminal

Connect the supplied USB-C cable to supply power to the transmitter or charge the battery.

Receiver (RX)

1. Power button

Press and hold the power button (for at least 2 seconds) to turn on or turn off the receiver.

2. Volume buttons

To turn up (+) / turn down (-) the input volume.

Keep holding down the button "+" or "-" to quickly adjust the volume.

Press and hold "+" and "-" buttons (for at least 2 seconds) simultaneously to make the

receiver enter the pairing state, which is used to pair the transmitter and receiver.

3. State lamp (Blue)

Indicates the connection state between the receiver and the transmitter。

4. Charge lamp

While the receiver is turned off, connecting the receiver to a computer with the supplied

USB-C cable starts charging the receiver's built-in battery and turns on the charge lamp in

green.

5. Clip

Use this clip for attaching the receiver to the proper place.

The clip can be directly inserted into the hot shoe on the top of the camera or the cold shoe

of the smartphone clamp.

6. Earphone jack

3.5mm stereo mini jack. Connect earphone to monitor the receiver output audio

Do not connect monaural earphones. This may lead to short-circuiting of the earphone

output, resulting in distorted sound output.

7. LINE OUT (Audio output) jack (3.5mm)

You can record audio by connecting the receiver to a camera, smartphone or other device

with the supplied audio cables.

8. USB-C terminal

Connect the supplied USB-C cable to supply power to the receiver or charge the battery.

9. LCD screen

Pairing status & signal

strength indicator

（TBC）

Receiver

battery status