Dumor Multilam 460 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Laminator Dumor Multilam 460. Dumor Multilam 460 8 stron.

Drukuj stronę

Dumor Multilam 460 Podręcznik użytkownika

Insert scrap paper before lowering or you will foul the opposite roller !

The scrap paper is to get the film web and machine stabilised before committing to produce.

Film must be narrower than the paper or you will foul the opposite roller !

Have the next sheets ready to insert !

Infeed overlap the sheets by ca 5 mm to avoid fouling the opposite roller !

• Lower the rolls

• Start the machine

• Let the wrinkles disappear

• Keep feeding continuously !

• Once stabilized use the real paper

• Be careful always to keep an overlap !

• Last sheet is scrap paper !

Once finished raise the rolls and turn OFF

If you use the film stripper wheels you will need from time to time to remove the waste film or the cutters will jam on

the roll.

The wheels are a wear part.

MAINTENANCE

Unplug the machine, let the machine cooling !

- Clean the rolls with rubbing alcohol to remove glue deposits

- Make sure brake is working

- Make sure tensioner rolls are free moving

- Make sure the rolls are not worn and are with no flat spots

The silicone rolls are wear parts and may need to be changed after some years of use.

There is a drive chain in the side frame and it should be greased each year by a trained technical person.

SPECIFICATIONS

Width

Control panel

Optional film thickness

Types of anti-curler fitted

Substrate

Warm up time

Temperature adjustment

Speed adjustment

Option

Weight

Size

Power Supply

360mm / 460mm / 660mm with anti-curling, single or double sided

Digital

From 20 mic bopp for single-sided use to 200 mic pet for double-sided use

Roller and blade

To 2mm

10 minutes

Cold up to 150°C

From 0.3 to 2 m/min in 9 steps

Film trimmer rotary knives with guards

Film perforator for easy tear

30kg / 44kg / 55kg

62 / 76 / 91cm(H)×52×40cm

220V/50HZ