dun-bri GROUP 308.033 Instrukcja instalacji i obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Sprzęt oświetleniowy dun-bri GROUP 308.033. dun-bri GROUP 308.033 4 stron. Dbg r65 aluminium 6-led directional warning module
Również dla dun-bri GROUP 308.033: Instrukcja instalacji i obsługi (4 strony)

Drukuj stronę
DBG M33 SERIES R65 LED
WARNING MODULE
10 FLASH PATTERNS
01
Single Flash (100 FPM)
02
Quad Flash (Left / Right Split)
03
Five Flash (Left / Right Split)
04
Triple Flash (Left / Right Split)
05
Rapid Flash (1200 FPM)
! WARNING ! - Do NOT look directly at the LEDs when in operation to prevent damage to your eyes.
WIRING DIAGRAM
+VDC
ALT SYNC (GROUP 1)
(RED WIRE)
Momentary Switch (Change Flash Pattern)
Latching Switch (On/Off)
Supplied with 190mm length of cable
Fuse and switches NOT supplied
TO CHANGE FLASH PATTERNS - Apply white
wire to the +VDC between 0.5 - 2 seconds.
Applying for 2.5 seconds will revert back to
the first pattern. A simple momentary switch
will be sufficient.
SYNCHRONISATION INSTRUCTIONS - Ensure
all modules are set to the same flash pattern.
Connect white wires of all modules together.
www.dun-bri.com
Dun-Bri Group, Watermill Industrial Estate, Aspenden Road, Buntingford, Hertfordshire, SG9 9JS, United Kingdom
GREEN WIRES (+)
Fuse (Required)
+44 (0)1763 274185
06
Double Flash (Left / Right Split)
07
Triple Flash
08
Single Flash (ECE R65 Approved) (93 FPM)
09
Single Flash (ECE R65 Approved) (146 FPM)
10
Combination Flash
ALT SYNC (GROUP 2)
GREEN WIRES (+)
(Not Connected)
Battery
ALTERNATE FLASH INSTRUCTIONS - Ensure
all modules are set to the same flash pattern.
For GROUP 1: Connect all green wires to the
+VDC.
For GROUP 2: Do not connect green wires.
Unconnected wires must be sealed to
prevent any water ingress.
SYNC
WHITE WIRE (+)
(BLACK WIRE)
Ground
-VDC