dun-bri GROUP 708.005 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa dun-bri GROUP 708.005. dun-bri GROUP 708.005 4 stron. Single camera reversing kit

Drukuj stronę

WARNING

Ensure that only suitably trained personnel attempt to install this device or devices. Failure to install the device

properly could result in damage to the vehicle, injury or even death.

Do not install and/or operate this safety product unless you have read and

understand the safety information contained in this guide.

Where applicable, proper installation combined with operator training in the use, care and maintenance of reversing safety devices are

essential to ensure the safety of personnel and the public.

Some warning devices can require high electrical voltages and/or currents. Use caution when working with live electrical connections.

This product must be properly earthed via a reliable connection. A poor earth connection and/or shorting of connections can cause high

current arcing, which can cause personal injury and/or severe vehicle damage, including fires.

Proper placement of the device(s) with the correct installation with maximise the performance of the device. Ensure that any switching or

control units used with the device are placed within easy reach of the operator so that he/she can operate the device without losing eye contact

with the road, particularly important during manoeuvres.

It remains the responsibility of the driver to ensure that all features of this product work correctly. In use, the device should be free of

obstructions from vehicle components, for example, the tailgate, people, vehicles or other obstructions.

Where applicable, the use of this or any other safety device does not ensure all drivers can or will observe or react to a hazard during

manoeuvres. It is your responsibility to be sure you can proceed safely before perfoming such actions. It is always recommended that you

utilise a trained banksman.

Preparing for installation

Carefully remove the camera system and examine the

contents for damage that may have occurred during transit. If

damage is found or if anything is missing, contact the Dun-Bri

Group for advice. Do not use broken or damaged devices or

parts. The contents should include;

1x 5" TFT LCD monitor

1x Monitor sun shield

1x Reversing camera

1x Mounting bracket

1x Remote control unit

1x Camera connection cable

1x Power connection cable

1x Heat shrink tube for camera connection

dun-bri

DIM

CAM

M/N

D/N

POWER

DOWNU

POWER

VIDEO

SELECT

MODE

SELECT

MODE

TFT LCD

MONITOR MOBILE

Rev. 07/17

Single Camera Reversing Kit (708.005)

Installation and mounting

Choose a suitable location for the camera that is free of

obstructions and at low-risk from accidental damage.

Mount the camera using the bracket attached. Using

the heat shrink tubing provided, cover the connection

between the camera and the cable.

Route the camera connection cable from the camera to

the location where you will be installing the monitor.

CAUTION: AIR BAGS

Many vehicles are now fitted with side and curtain air bag

systems in addition to those traditionally fitted within the front

of the vehicle. Ensure that you do not drill into the cables or

sensors and accidentally trigger the devices during fitting.

WARNING: ROOF SUPPORTS

There will be a roof support member(s) that spans the

distance between the driver's side and the passenger's side

of the compartment. Do not drill through or into this member.

Ensure that you adjust the cable route accordingly.

Mount the camera monitor, connect the camera cable and

attach the sun shield.

Route and install the power cable harness to a suitable

connection. The harness will be fitted with a 3 Amp mini

blade fuse. Ensure all connections are secure. Refer to

Fig 1. for further cable information and colour coding.

Check all connections and power up the monitor to check

correct functionality of the reversing camera.

Using the system menu and changing settings

There are a number of options and settings available from the

menu, accessible from the monitor. To access them, press

on the Menu button. See Fig 2. for location information and

symbol key. Further information on the settings available to

you, and what your options are are also included in Fig 2.

Further help and assistance

For further help and technical support, please call Dun-Bri

Group directly on 01763 274185.

Installation Guide:

Page 1