CashConcepts CCE 2070 Krótka instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Krótka instrukcja obsługi dla Liczarki gotówki i sortery monet CashConcepts CCE 2070. CashConcepts CCE 2070 2 stron.

Drukuj stronę

Dear customers,

as a supplement to your new CashConcepts CCE 2070, you will find a short instruction how to operate the new banknote counter. You

can download a detailed, multilingual manual on our website at: SERVICE -> USER MANUALS -> BANKNOTE COUNTER

Panel description:

Button

Function

START

Starting

the

process

CLEAR

Clear

CUR

Currency exchange

ADD

Addition

VAL

Value selection

BATCH

Counting stop

SETUP

Selection

functions

1 / Speed

Numerical value / counting

speed

2,3,5,6

Numerical value

4 / Auto

Numerical value / Start

setting

7 / IR

Numeric

8 / MG

Counterfeit Detection and

9 / UV

Paper

0 / DD

Adjustment

Commissioning:

•

Connect the mains plug to the socket and to the CCE 2070 and switch it on.

•

Press the sorted notes against a flat surface so that they are flush on one side of the sheet and place them in the feeder centered

with the flush side facing back. Slide the two banknote feeders against the stack so that the notes can be optimally inserted.

•

If the notes are not centered or inserted flush, incorrect counting or non-detection and sorting of notes may occur.

In the case of banknotes suspected of being counterfeit, the stop procedure is set in such a way that the banknotes suspected

•

of being counterfeit is the top one on the stack.

Cleaning the sensors

Due to the banknotes and the dust that is deposited, there are sediments in front of the sensors of the machine. These impurities lead to

increased sorting out and non-recognition of genuine banknotes. Therefore, please clean the sensors of the CCE 2070 at regular intervals.

When cleaning the machine, generally switch off the machine and pull the mains plug. With a soft brush and cloth you can also remove

the dust from the sensors in the hopper and stacker area and from the banknote feed wheels. To clean the counterfeit sensors, we

recommend the additional use of a non-flammable compressed air spray and special cleaning cards to remove dirt and fine dust even in

inaccessible places. You can order these utensils from our webshop (www.cce.gmbh).

counting

Starts (with manual start) and stops the counting process of the machine

Deletes the count result or the programmed count stop.

Switches between the programmed and activated currencies (e.g. EUR, USD...)

Switches the addition function of several counting operations on and off

Switches between the programmed values of a currency (e.g. 5.00 €, 10.00 €...)

Recalls pre-programmed count stops (100 - 50 - 20 - 10 - 5 - Off).

Deletes the count stop by pressing the CLEAR key

setting

Adjust the setting of the machine according to your requirements. The use of the SETUP

button is described accordingly in the functions.

• Normal numerical function for setting the batch value

• Double function with setup: Selection of speed 800 / 1,200 / 1,600 / 1,900

Press the SETUP button, then 1 / SPEED and then these two buttons in turn to toggle

through the programmed counting speeds.

• Normal numerical function for setting the batch value

• No double function

• Normal numerical function for setting the batch value

• Double function with setup: Selection of automatic or manual count start

Value

• Normal numeric function for setting the batch value

• Press and hold the key for 2 seconds: Switch on/off counterfeit detection or paper

Thickness

thickness detection.

• Adjustment of the detection level:

Press SETUP

Select function key to be changed (e.g. 7 / IR for IR adjustment)

Select the level via the numeric keys (0-9), whereby 10 levels are not available for

all functions!

Save the setting by pressing the START key.

CCE GmbH – von-Behring-Straße 6a – 88131 Lindau

Tel. +49 (0) 8382 – 943 15 – 0 / Fax +49 (0) 8382 – 943 15 – 20 / [email protected]

CCE 2070

Short Manual

Description