CashConcepts CCE 4000 Krótka instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Krótka instrukcja obsługi dla Liczarki gotówki i sortery monet CashConcepts CCE 4000. CashConcepts CCE 4000 2 stron.
Również dla CashConcepts CCE 4000: Podręcznik użytkownika (11 strony)
Drukuj stronę
Dear customers,
as a supplement to your new CashConcepts CCE 3060, you will find a short instruction how to operate the new banknote counter. You
can download a detailed, multilingual manual on our website at: www.cce.gmbh/service/manuals. We recommend that you download
and read the detailed instructions carefully.
Panel description:
Button
START / STOP
Start counting process
CLEAR
Clear Display
SET
Setup
REP
Report
+
Batch
-
Batch
PRINT >
Print function
Commissioning:
• Place the CCE 4000 on a stable and flat surface.
• Connect the power plug to the wall outlet.
• Now connect the power cable to the CCE 4000 and switch it on.
• The unit now performs a self-test. The display shows "WAIT" during this test run.
• Pour the coins into the coin hopper. Please ensure that no foreign objects (such as paper residues from coin rolls) or coins from other
currencies enter the machine.
• Press the "Start / Stop" button and start the counting and sorting process and fill the coins in small quantities into the hopper. The
continuous filling of smaller quantities ensures a faster and better transport of the coins over the coin transport wheel.
• The coins are now sorted on the individual coin pockets. When all coins have been counted and sorted, the counting process is
automatically stopped.
Important messages:
Message
400,000 coins were counted, the transport brush must be brought into the second position (see detailed manual) to
POS 2
compensate for the abrasion of the transport brush.
After 900,000 coins the transport brush has to be replaced. In this case, please contact your dealer to order the
BRUSH
corresponding wear part and replacement instructions.
Cleaning the sensors
The CCE 4000 is equipped with comprehensive fault management in order to inform you about problems in the processing of money, but
also to draw attention to the contamination of sensors. Please pay particular attention to the following instructions for cleaning the
machine in order to avoid errors caused by contaminated sensors and to have an optimum result when counting coins.
Due to the coins and by the settling dust, deposits occur in front of the sensors of the machine and in the transport area of the coins.
These impurities can lead to problems during transport and to the sorting of the coins.
Please clean the sensors of the CCE 4000 at regular intervals. Generally, we recommend a short cleaning at the end of the working day,
this process only takes a few minutes. When cleaning the machine, always switch off the appliance and unplug the mains plug.
Slide the Safety-Lock switch on the back to the opened lock symbol. Turn the two side openers according to the imprint forwards and pull
the cover of the CCE 4000 upwards. In front of you, you see the sorting area of the CCE 4000. Remove the coin boxes from the brackets
and blow the dust around the transport brush downwards through the pipes of the individual coins. In addition, you can also work with
compressed air spray from below through the pipes against the transport brush in order to remove static dust on the sensors. After
cleaning, insert the cover of the CCE 4000 onto the device and place the safety-lock switch on the back of the closed lock symbol and
insert the coin boxes back into the device. You can order the compressed air spray from our webshop (www.cce.gmbh).
Function
Starts and stops the counting process of the machine / Exits the setup menu
Deletes the count result
Opens the setup menu for setting the machine functions
Calls the detailed count result
Activate batch count / In Setup menu: Current batch value +1
In Setup menu: Current batch value -1
Prints the count result on an optional printer
CCE – Cash Concepts Europe GmbH – Kemptener Straße 99 – 88131 Lindau
Tel. +49 (0) 8382 – 943 15 – 0 / Fax +49 (0) 8382 – 943 15 – 20 / [email protected]
CCE 4000
Short Manual
Description
Description