Dunbier Adelaide Podręcznik użytkownika - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt żeglarski Dunbier Adelaide. Dunbier Adelaide 20 stron.

Fitting Boats To The Trailers.

For all Boat fit-ups to trailers, adjust winch post and alignment of winch after all other adjustments are made.

Sports Series, Suits both Fibreglass and Aluminium Boats:

Boat should sit hard on all keel rollers, side pads to be positioned as far out from keel as possible then adjusted to take the

minimum amount of weight to steady the boat. If they take too much weight of the hull, then the boat will be hard to launch off the trailer.

Centre-Line Series and Centreline Alloy Series, Most Suited For Aluminium Boats:

Boat should sit hard on all keel rollers, Centre-Line systems not to be touching any part of the hull, side Teflon skid pads to be positioned

as far out from the keel as possible then to be adjusted up firm against the hull of the boat.

Rollamatic Series, Suits both Fibreglass and Aluminium Boats:

Set up, with boat sitting firm on the rear cradle and front keel roller, making sure that the rear cradle arms will not hit any strakes when

the boat comes off. Adjust all remaining keel and side wobble roller arms up by placing a jack under the leg until all are firm.

15.