Duncan ShapeShifter Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pedał muzyczny Duncan ShapeShifter. Duncan ShapeShifter 12 stron. Stereo tremolo pedal

Stereo Input Jacks - Plug in any instrument, stereo or mono.

Stereo Output Jacks – Run cable or cables to any amp, other pedal or recording system in

either stereo or mono.

Power Jack - You can use any 9 - 18 Vdc regulated DC adapter (negative polarity center terminal).

Access internal 9V battery by removing (4) screws on underside of pedal. (Battery not included)

When the pedal is not in use, save your battery life by removing your instrument cable from

the Input jack.

LET'S GET STARTED!

1. Plug in a 9 - 18 Vdc regulated DC power supply with a negative polarity center terminal.

2. Run good quality shielded guitar cables from your guitar to the input jack or from another

stereo pedal's output jacks, and from the output jack or jacks to your amp's input or to the

next pedal on your pedal board or next item in the chain.

3. Start with the Wave, Shape, Depth and Speed knobs at 12 o'clock and

the Channel Phase switch in the middle. Set your amp level appropriately.

4. Engage the ShapeShifter by pressing the True Bypass footswitch.

The LED will Light up Blue when it's active.

5. Have fun experimenting!