AOMWAY Commander V1S Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Okulary 3D AOMWAY Commander V1S. AOMWAY Commander V1S 16 stron. Fpv goggles

AOMWAY 10

 DVR is only used for analog recording under RF/ AV in

mode, not available for HD recording;

 DVR can auto save file if the power is accidently shut off.

6. HEAD TRACKER:

 Here head tracker is modularized, default to use CH7, CH8

on radio controller; then pan, tilt servo cable must be

connected to CH7, CH8 on receiver side as well;

 Note that this head tracking system has two operation

modes: one for 360 degree brushless gimbals and another for

90 degree pan/tilt servos. Press and hold Key ① before

power on, after 3s, you will hear buzzer beeping twice, and

then release the button to switch mode once. When power on,

it stays on last time saved mode.

 Connect goggles to radio controller: firstly power off your

radio controller then have trainer cable's one end plugged into

goggles' PS2 data port and another end plugged into radio

controller;

 Switch on radio controller, set up the trainer function,

activate CH7 and CH8; long press Key ① for 3s to activate

head tracker, when goggles moves at pan, tilt direction, the

servo will move to the same direction;

 If the servo moving direction is opposite, long press Key

① for 5s to change direction once in following order: 1.

reverse pan and tilt direction; 2. reverse tilt direction;

3.reverse pan direction; 4. back to default.

 If head tracking function does not work, please check

radio controller channel and servo setup;

WWW.AOMWAY.COM

VISION SYSTEMS