Duncan 84-50 Tube Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Duncan 84-50 Tube. Duncan 84-50 Tube 12 stron. Tube guitar amplifier

IMPORTANT: In order for the Quadra tone Footswitch to have full control over the

various functions, make sure the amp is in the green (clean) channel and all Boosts

and Crunch are off (pushed in) on the front panel. Then simply plug the Programmable

Footswitch into the "4 Function" DIN jack on the front of your 84-50.

DIP switches inside the footswitch allow you to create the ~ sounds most useful to you.

The footswitch comes pre-programmed as follows:

#1 Button - Green Channel = "Fendery" clean with good presence & depth.

#2 Button - Red Channel = Tight, punchy, dirty rhythm - Fat, bluesy lead.

#3 Button - Red Channel with Boost 2 = Hi Gain lead, smooth, rich in harmonics and

lots of sustain.

#4 Button - Red Channel with Boost 1, Boost 2 and Crunch

USING THE 84-50 WITH A MIDI SET-UP

With the addition of a Duncan adapter cable (Model # 128017) and a programmable

MIDI switching device such as the Scholz MIDI Octopus, you can place functions of the

84-50 under MIDI control: