Danfoss VLT AutomationDrive FC 302 with Connectors Instrukcje instalacji

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Napędy DC Danfoss VLT AutomationDrive FC 302 with Connectors. Danfoss VLT AutomationDrive FC 302 with Connectors 4 stron.

Drukuj stronę
Installation Instructions
VLT® AutomationDrive FC 302 with Connectors
NOTICE
®
VLT
AutomationDrive FC 302 with connectors is
NOT UL approved.
The ETR functionality is not guaranteed.
General rating: Enclosure IP55.
2 Safety Instructions
WARNING
DISCHARGE TIME
The frequency converter contains DC-link capacitors, which
can remain charged even when the frequency converter is
not powered. Failure to wait the specified time after power
has been removed before performing service or repair work,
could result in death or serious injury.
1.
Stop the motor.
2.
Disconnect AC mains, permanent magnet type
motors and remote DC-link power supplies,
including battery back-ups, UPS, and DC-link
connections to other frequency converters.
3.
Wait for the capacitors to discharge fully, before
performing any service or repair work. The duration
of waiting time is specified in Table 2.1.
Voltage
Power range
[V]
3x400
0.55–7.5
High voltage can be present even when the warning LED indicator
lights are off.
Table 2.1 Discharge Time
Minimum waiting
[kW]
time (minutes)
4
Danfoss A/S © Rev. 06/2014 All rights reserved.
3 Items Supplied
Depending on the ordering number, the following is supplied:
FC 302 with connectors - 2 motor connectors (134N3195)
Illustration 3.1 2 Motor Connectors
MI04G102