CashTester BC 231 SD Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Licznik gotówki CashTester BC 231 SD. CashTester BC 231 SD 17 stron.

Turn on the power switch: the machine will display the software version and perform a self-test. lf the

test is successful, the machine will enter ready state. lf an error message appears on the LCD display,

check the chapter 3.5 Error messages and solutions in this manual.

Before counting the banknotes, please adjust the left and right hopper guide to a suitable position

based on the width of the banknotes. Now place the banknotes in the middle of the hopper and the

machine will start counting.

2.2 Currency

After turning on the machine, the active currency is displayed on the LCD display. The BC 231 SD comes

with multiple currencies pre-installed. When you want to count other currencies, press the 'CUR/PRT'

key until you have found the desired currency.

2.3 Counting mode

Different counting modes can be chosen and for most currencies all modes are available. First select

the correct currency and to choose the correct mode, press 'MODE' to toggle between them.

MIX mode - In the MIX mode, 'MIX' is displayed on the display and the machine counts all

(un)sorted notes of the same currency. After finishing the counting, the total value and total

number of genuine notes are displayed on the LCD display. To view a detailed counting result

press and hold 'ADD/REP' for 2 seconds. In this mode counterfeit detection is ON.

SORT mode - In the SORT mode, 'SORT' is displayed on the display and the machine only counts

notes of the same denomination. For this function the first note, which is counted by the BC 231

SD, determines which notes are counted and which are rejected. In this mode counterfeit

detection is ON.

UV mode - In the UV mode, 'UV' is displayed on the display and the machine only counts notes

of the same denomination. For this function the first note, which is counted by the BC 231 SD,

determines which notes are counted and which are rejected. In this mode counterfeit detection

is ON (UV only!).

Count mode – When you only want to count the number of banknotes, the 'COUNT' mode

should be activated. After finishing the counting, the total quantity is displayed on the display.

The counterfeit detection is OFF.

Accumulative counting (ADD) – To accumulate different countings, press the 'ADD/REP' key:

now ADD is displayed on the display. When the accumulative quantity reaches 10.000 or the

accumulative value reaches 1.000.000, the number will be reset to 0.

Batch counting (B:---) – To set a batch, press 'BAT/CLR' and now 'B:100' is displayed. To change

this number, press 'BAT/CLR' several times and the BC 231 SD will toggle between the standard

settings (100, 50, 20, 10, 5 and ---) where '---' means the function is disabled. To set another

quantity, press '+1/+10' to adjust the pre-configured settings.

After setting the batch number, place the banknotes on the hopper and the machine will start

counting. When the set batch number is reached, the machine will stop automatically. After

removing the notes from the stacker, the banknote counter will continue.

2.4 Report / printing

After the counting has finished, both the total value and total quantity of the counted, genuine

banknotes are displayed on the display. To view a detailed counting result press and hold 'ADD/REP'

for 2 seconds. To print a more detailed counting result (quantity and value per denomination) press and

hold 'CUR/PRT' for 2 seconds.

Cashtester BC 231 SD

- 4 -