Casio 1822/1968 Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Oglądaj Casio 1822/1968. Casio 1822/1968 2 stron.
Drukuj stronę
Module No.1822/1968
• Press D D D D D to change from mode to mode.
• After you perform an operation in any mode, pressing D D D D D returns to the Timekeeping Mode.
• If you do not press any button for a few minutes while making settings in any mode (indicated when settings are flashing), the watch automatically clears the setting screen (settings stop
flashing) and returns to the normal display for the mode you are in.
• This watch returns to the Timekeeping Mode whenever you hold down the D D D D D button for one or two seconds. If you ever lose track of what mode you are in or what you should do next,
hold down D D D D D to return to normal timekeeping.
• In any mode press L L L L L to illuminate the display.
The operational procedures for Module 1822 and 1968 are identical. All of the illustrations in this manual show Module 1822.
Timekeeping Mode
[Module 1968]
TIMEKEEPING MODE
Day of week
Month
To set the time and date
1. Hold down A A A A A while in the Timekeeping Mode until the
Day
2. Press D D D D D to change the selection in the following se-
Seconds
Hour
Minutes
PM indicator
3. While the seconds digits are selected (flashing), press B B B B B to reset the seconds to
00. If you press B B B B B while the seconds count is in the range of 30 to 59, the seconds
are reset to 00 and 1 is added to the minutes. If the seconds count is in the range
of 00 to 29, the minutes count is unchanged.
4. While any other digits (beside seconds) are selected (flashing), press B B B B B to in-
crease the number or C C C C C to decrease it. While the 12/24-hour format setting is
selected, press B B B B B or C C C C C to toggle it between 12 and 24. While the day of the week
is selected (flashing), press B B B B B to advance to the next day or C C C C C to return to the
previous day.
• Except for when adjusting the seconds or setting the 12/24-hour format, holding
down a button changes the current selection at high speed.
• When the 12-hour format is selected, the indicator P appears on the display to
indicate "P.M." times. There is no indicator for "A.M." times.
• When the 24-hour format is selected, the indicator 24 appears on the display.
5. After you set the time and date, press A A A A A to return to the Timekeeping Mode.
ABOUT THE BACKLIGHT
In any mode, press L L L L L to illuminate the display for about two seconds.
• The backlight of the watch employs an electro-luminescent (EL) light, which loses
illuminating power after very long use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The backlight automatically stops illuminating whenever an alarm sounds.
COUNTDOWN ALARM MODE
Current time
The countdown alarm can be set within a range of 1 sec-
ond to 24 hours. When the countdown reaches zero, an
Auto repeat
Progress
alarm sounds for 10 seconds or until you press any but-
beeper on
on indicator
ton.
indicator
To set the countdown start time
1. Hold down A A A A A while in the Countdown Alarm Mode. The
2. Press D D D D D to change the selection in the following se-
Minutes
1/10
Second
Mode indicator
Seconds
3. Press B B B B B to increase the selected number or C C C C C to decrease it. Holding down either
button changes the selection at high speed.
• Press B B B B B and C C C C C at the same time to clear the starting time to 0:00' 00".
• To set the starting value of the countdown time to 24 hours, set 0:00' 00".
4. After you set the countdown start time, press A A A A A twice to return to the Countdown
Alarm Mode.
To use the countdown alarm
1. Press B B B B B while in the Countdown Alarm Mode to start the countdown alarm.
2. Press B B B B B again to stop the countdown alarm.
• You can resume countdown alarm operation by pressing B B B B B .
3. Stop the countdown alarm and then press C C C C C to reset the countdown time to its
starting value.
• When the end of the countdown is reached and auto repeat timing is off, the alarm
sounds for 10 seconds or until you stop the alarm by pressing any button. Count-
down timing stops and the countdown time is automatically reset to its starting
value after the alarm stops.
To switch auto repeat timing and the progress beeper on and off
1. Hold down A A A A A while in the Countdown Alarm Mode. The hour digits flash on the
display because they are selected . Press A A A A A again to move the flashing to the auto
repeat ON/OFF setting.
Countdown Alarm Mode
[Module 1822]
seconds digits flash on the display because they are
selected .
quence.
Seconds
Hour
12/24-Hour Format
Day of£ w eek
Day
hours digits flash on the display because they are se-
lected.
quence.
Hour
Minutes
GENERAL GUIDE
Stopwatch Mode
2. Press B B B B B or C C C C C to toggle auto repeat on (
3. Press D D D D D to move the flashing to the progress beeper ON/OFF setting.
4. Press B B B B B or C C C C C to toggle the progress beeper on (
5. Press A A A A A to return to the Countdown Alarm Mode.
• When the end of the countdown is reached while auto repeat is on, the alarm sounds,
but the countdown restarts from the beginning without stopping. You can stop the
countdown by pressing B B B B B and manually reset to the start time by pressing C C C C C .
• If you set a starting time of 10 seconds or less and have Auto Repeat turned on, the
countdown alarm tone (which normally sounds for 10 seconds) sounds for only one
Minutes
second.
• When the progress beeper is turned on, the watch beeps as the countdown time
passes the 10, 5, 4, 3, 2, and 1-minute marks, and the 50, 40, 30, 20, 10, 5, 4, 3, 2,
and 1-second marks.
Month
Target time on indicator
Current time
Minutes
Mode indicator
(a) Elapsed time measurement
Start
(b) Split time measurement
Start
(c) Split time and 1st-2nd place times
Start
About the Auto-Start function
With the Auto-Start function, the watch performs a 5-second countdown. When the
countdown reaches zero, stopwatch operation starts automatically. During the final
three seconds of the countdown, a beeper sounds with each second.
To turn the Auto-Start function on and off
While the display is showing all zeros in the Stopwatch Mode, press C C C C C to toggle it on
and off.
Seconds
• The indicator AUTO-ST appears and 05 is shown in the upper display while Auto-
Start is turned on. The AUTO-ST indicator is not shown and the upper part of the
display shows the current time when Auto-Start is turned off.
About the Target Time function
With the Target Time function, an alarm sounds for ten seconds whenever the time
being kept by the stopwatch reaches a target time you have preset.
To set the Target Time and to turn it on and off
Target time on indicator
Minutes
Mode indicator
4. Press A A A A A to move the flashing to the target time ON/OFF setting.
5. B B B B B or C C C C C to toggle the target time on and off.
6. Press A A A A A to return to the Stopwatch Mode.
Important!
The alarm will not sound if you do not turn on the target time.
• Press A A A A A , D D D D D or L L L L L to stop the alarm after it starts to sound.
Alarm Mode
) and off.
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hour, 59 minutes, 59.99 seconds. You can also have an
alarm sound when a target time is reached. The Stop-
watch Mode also features an Auto-Start function.
1/100 Second
Seconds
Stop
Re-start
Split
Split release
Split
Stop
First runner
Second runner
finishes.
finishes.
Record time of
first runner.
1. While the display is showing all zeros in the Stopwatch
Mode, hold down A A A A A , and the hour digit of the target
Hour
time starts to flash because it is selected .
2. Press D D D D D to change the selection in the following sequence.
Hour
3. Press B B B B B to increase the selected number or C C C C C to de-
crease it. Holding down either button changes the se-
lection at high speed.
Seconds
• Press B B B B B and C C C C C at the same time to clear the setting to
0:00' 00".
1822/1968-1
Dual Time Mode
) and off.
Stop
Clear
Stop
Clear
Split release
Clear
Record time of
second runner.
Minutes
Seconds