Danfoss 088L5130 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Termostat Danfoss 088L5130. Danfoss 088L5130 20 stron.
Również dla Danfoss 088L5130: Instrukcja instalacji (4 strony), Podręcznik użytkownika (6 strony)

Drukuj stronę

Programmable Thermostats 088L5130/5132

Press the OK button. The temperature setting will now ﬂ ash in

the upper part of the display.

Press the Up or Down buttons to set the required temperature.

Press the OK button. The symbol for the next event (e.g. at

work) will now ﬂ ash, allowing you to set the time and tempera-

ture for this period of the day by repeating steps 6-12.

Once time and temperature have been set for the four events

applicable for the 5-day period Monday to Friday, Exit will ﬂ ash.

Press the OK button. The next 2 days, Sat Sun, will then ﬂ ash.

Please note that now only two events (Day and Night) are dis-

played.

Press the OK button. The symbol for the ﬁ rst event will ﬂ ash.

Set the time and temperature for this event, and for the following

event, by repeating steps 6-12.

Finally, select Exit to exit the Program for a 5:2 schedule.

SET TEMP

PROGRAM

Quick Set Temperature

I want to permanently change the temperature for

the event currently active in the automatic program.

To do so, you must:

Press the Up or Down buttons to set the required temperature

for the event currently active.

Press the OK button.

The new temperature setting will then be saved and used for this

event in the future.

Example: If you change the temperature on a Tuesday morning

while the thermostat is running a 5:2 program, the new tempera-

ture will apply to all mornings from Monday to Friday.

Adaptive Preheat Feature

I want to ensure that the required temperature has

already been reached when I get up in the morning

or come home from work.

To do so, you must activate the adaptive function:

Press the OK button to activate the menu.

Press the Up or Down buttons until the Settings option ﬂ ashes.

Press the OK button.

Press the Up or Down buttons until the Adaptive option

ﬂ ashes.

Press the OK button. On or Off will now ﬂ ash in the upper part

of the display.

Press the Up or Down buttons until On ﬂ ashes.

Press the OK button.

Select Exit to exit the option.

Please note: The adaptive preheat function is only related to the

4-event program and only works in connection with going from one

event to another where the temperature is going to be raised.

EXIT

SAT SUN

The adaptive preheat feature calculates when the thermostat must

start the heating system to ensure that the required temperature

is reached at the set time. Three days after the adaptive preheat

feature has been activated, it has learned when the heating must

be switched on to attain the required temperature.

Factory setting: ON

TIME

DAY

CHILDLOCK

SETTINGS

C°/F°

APPLICATION

OFFSET TEMP

READOUT

ADAPTIVE

DISPLAY

FACTORY RESET

EXIT

Manual Mode

I want to temporarily cancel the automatic 4-event

program and manually select temperature.

To do so, you must use manual mode:

Press the OK button to activate the menu.

Press the Up or Down buttons until the Mode option ﬂ ashes.

Press the OK button.

Press the Up or Down buttons until Man. mode ﬂ ashes in the

upper part of the display. The temperature will begin to ﬂ ash.

Press the Up or Down buttons until the required temperature

ﬂ ashes.

Press the OK button.

Please note: This feature can be useful for instance if you are go-

ing on holiday and want to maintain a frost protection temperature

(e.g. 41°F) while you are away.

To return to the automatic 4-event program, you must select Auto.

Please refer to page 2 for instructions.

MAN. MODE

MODE

Temporary Override

I want to temporarily set a comfort temperature for

a single event, e.g. because I am not at work one

day and want to maintain a higher temperature or

because I am having a party.

To do so, must use override mode:

Press the OK button twice to activate the menu.

Press the Up or Down buttons until the Mode option ﬂ ashes.

Press the OK button.

Press the Up or Down buttons until Override ﬂ ashes in the up-

per part of the display. The temperature will begin to ﬂ ash.

Press the Up or Down buttons until the required temperature

ﬂ ashes.

Press the OK button.

English