Danfoss DEVIreg 330 Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Termostat Danfoss DEVIreg 330. Danfoss DEVIreg 330 12 stron. Electronic thermostat -10 to +10 c
Również dla Danfoss DEVIreg 330: Instrukcja instalacji (12 strony), Instrukcja instalacji (12 strony)
Drukuj stronę
DEVIreg™ 330 (-10 to +10°C)
Protection class
Dimensions
Weight
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
• The thermostat must be connected to a power supply
via an all-pole disconnection switch.
• The sensor is to be considered as live voltage. Have this
in mind if the sensor must be extended.
• Always connect the thermostat to continuous power
supply.
• Do not expose the thermostat to moisture, water, dust,
and excessive heat.
Installation Guide
Class II -
86 x 36 x 58 mm
83 g
5