Casio 2734 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Casio 2734. Casio 2734 5 stron.

Drukuj stronę

Operation Guide COMBIWVGE1

• Normally, the signal reception date shown by the Last Signal screen is the date data

included in the received time calibration signal. When only time data is received,

however, the Last Signal screen shows date as kept in the Timekeeping Mode at the

time of signal reception.

• If you are in an area where proper time calibration signal reception is impossible, the

watch keeps time within ±20 seconds a month at normal temperature.

• If you have problems with proper time calibration signal reception or if the time

setting is wrong after signal reception, check your transmitter, current city code, DST

(summer time), and auto receive settings. The following are the initial factory defaults

for these settings.

Setting

Initial Factory Default

Transmitter

A/T

City code

LON

(London) (Modules 2734, 3749, and 4774)

BER

(Berlin) (Modules 2758, 3748, and 4773)

DST (summer time)

(Auto switching)

DST

Auto receive

(Auto receive)

R/C

Transmitters

This watch is designed to receive the time calibration signal transmitted from Rugby,

England and the signal from Mainflingen, Germany. You can select either one of the

transmitters, or you can configure the watch to automatically select the transmitter that

has the strongest signal.

• The following explains how the watch determines which transmitter it should check

first while the watch is configured for auto transmitter search (

Modules 2734, 3749, and 4774

In this case:

The first signal auto search operation

after factory default settings are in effect,

or after the city code has been changed

Any case other than the above.

Modules 2758, 3748, and 4773

In this case:

The watch does this:

The first signal auto search operation

1. Checks the Mainflingen signal first.

after factory default settings are in effect,

2. If the Mainflingen signal cannot be

or after the city code has been changed

Any case other than the above.

1. Checks the last successfully received

2. If the last successfully received signal

• Since the watch checks signals from both transmitters when

transmitter setting, the signal receive operation can take as long as 12 minutes.

• To find out the module number of your watch, look at its

2734

back cover. The Module number (2734, 2758, 3748,

3749, 4773, or 4774) will be engraved inside the box on

2758

the back cover.

To select a transmitter

1. In the Timekeeping Mode, hold down A until the

transmitter indicator starts to flash, which indicates the

setting screen.

2. Use D to scroll through available transmitter settings

until the one you want to select is displayed.

To set up the watch to do this:

Automatically select the Rugby or Mainflingen signal

Receive the Mainflingen signal

Receive the Rugby signal

• Note that

---

appears in place of the transmitter indicator when any city code

LON

PAR

BER

ATH

besides

, or

indicates that you cannot specify a transmitter.

3.Press A twice to exit the setting screen.

Timekeeping

• Resetting the seconds to

while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to

without changing the minutes.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

• The year can be set in the range of 2000 to 2039.

• The watch's built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch's battery replaced.

• The current time for all city codes in the Timekeeping Mode and World Time Mode is

calculated in accordance with the Greenwich Mean Time (GMT) differential for each

city, based on your Home City time setting.

• GMT differential is calculated by this watch based on Universal Time Coordinated

(UTC*) data.

* The letters "UTC" stands for "Universal Time Coordinated," which is the world-wide scientific

standard of timekeeping. It is based upon carefully maintained atomic (cesium) clocks that

keep time accurately to within microseconds. Leap seconds are added or subtracted as

necessary to keep UTC in sync with the Earth's rotation. The reference point for UTC is

Greenwich, England.

12-hour/24-hour Timekeeping Formats

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also

applied in all other modes.

• With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and no indicator appears for times in the range of

midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59. The

indicator 24 indicates the 24-hour format.

A/T

The watch does this:

1. Checks the Rugby signal first.

2. If the Rugby signal cannot be received,

checks the Mainflingen signal.

1. Checks the last successfully received

signal first.

2. If the last successfully received signal

cannot be received, checks the other

signal.

received, checks the Rugby signal.

signal first.

cannot be received, checks the other

signal.

A/T

is selected as the

Select this transmitter setting:

A/T

DCF

MSF

is selected as the Home City code. This

Illumination Precautions

The watch has an EL (electro-luminescent) panel that causes the entire display to

glow for easy reading in the dark.

In any mode, press B to illuminate the display for about one second.

• The electro-luminescent panel that provides illumination loses power after very long

use.

• Illumination may be hard to see when viewed under direct sunlight.

• The watch may emit an audible sound whenever the display is illuminated. This is

due to vibration of the EL panel used for illumination, and does not indicate

malfunction.

• Illumination turns off automatically whenever an alarm sounds.

• Frequent use of illumination runs down the battery.

City Code Table

City

GMT

City

Code

Differential

– – –

–11.0

Pago Pago

HNL

Honolulu

–10.0

Papeete

ANC

Anchorage

–09.0

Nome

San Francisco, Las Vegas, Vancouver,

LAX

Los Angeles

–08.0

Seattle/Tacoma, Dawson City

DEN

Denver

–07.0

El Paso, Edmonton

Houston, Dallas/Fort Worth,

CHI

Chicago

–06.0

New Orleans, Mexico City, Winnipeg

Montreal, Detroit, Miami, Boston,

NYC

New York

–05.0

Panama City, Havana, Lima, Bogota

CCS

Caracas

–04.0

La Paz, Santiago, Port Of Spain

RIO

Rio De Janeiro

–03.0

Sao Paulo, Buenos Aires, Brasilia, Montevideo

– – –

–02.0

– – –

–01.0

Praia

GMT

Dublin, Lisbon, Casablanca, Dakar, Abidjan

+00.0

LON

London

PAR

Paris

Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,

+01.0

BER

Berlin

Frankfurt, Vienna, Stockholm, Barcelona

ATH

Athens

Helsinki, Istanbul, Beirut, Damascus,

CAI

Cairo

Cape Town

+02.0

JRS

Jerusalem

JED

Jeddah

+03.0

Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow

THR

Tehran

+03.5

Shiraz

DXB

Dubai

+04.0

Abu Dhabi, Muscat

KBL

Kabul

+04.5

KHI

Karachi

+05.0

Male

DEL

Delhi

+05.5

Mumbai, Kolkata, Colombo

DAC

Dhaka

+06.0

RGN

Yangon

+06.5

BKK

Bangkok

+07.0

Jakarta, Phnom Penh, Hanoi, Vientiane

Singapore, Kuala Lumpur, Beijing, Taipei, Manila, Perth,

HKG

Hong Kong

+08.0

Ulaanbaatar

SEL

Seoul

Pyongyang

+09.0

TYO

Tokyo

ADL

Adelaide

+09.5

Darwin

SYD

Sydney

+10.0

Melbourne, Guam, Rabaul

NOU

Noumea

+11.0

Port Vila

WLG

Wellington

+12.0

Christchurch, Nadi, Nauru Island

• Based on data as of June 2006.

Other major cities in same time zone