Danfoss ECtemp 530 Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Termostat Danfoss ECtemp 530. Danfoss ECtemp 530 16 stron.
Również dla Danfoss ECtemp 530: Instrukcja instalacji (16 strony)
Drukuj stronę
ECtemp 530
Note: Please be aware of the following:
▪ The floor temperature is measured where the floor
sensor is placed.
▪ The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
▪ Floor manufactures often specify the max temperature
on the top surface of the floor (usually 27-28˚C).
▪ Always use a floor sensor to control floor heating.
Without a floor sensor, the temperature control may
be less accurate and you risk overheating the floor.
Thermal
Examples of floor-
resist-
ing
ance
2
[m
K/W]
0.05
8 mm HDF based
laminate
0.10
14 mm beech par-
quet
0.13
22 mm solid oak
plank
< 0.17
Max. carpet thick-
ness suitable for
floor heating
0.18
22 mm solid fir
planks
Installation Guide
Details
> 800
3
kg/m
650 - 800
3
kg/m
> 800
3
kg/m
acc. to
EN/IEC
1307
450 - 650
3
kg/m
Approximate
setting for 25˚C
on top surface
of floor
28˚C
31˚C
32˚C
34˚C
35°C
11