Danfoss ECtemp 530 Instrukcja instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Termostat Danfoss ECtemp 530. Danfoss ECtemp 530 16 stron.
Również dla Danfoss ECtemp 530: Instrukcja instalacji (16 strony)
Drukuj stronę
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
• The thermostat must be connected to a power supply
via an all-pole disconnection switch.
• The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
• Always connect the thermostat to continuous power
supply.
• Do not expose the thermostat to moisture, water,
dust, and excessive heat.
6
Danfoss ECtemp 530
Installation Guide