Danfoss RET2000 M Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Termostat Danfoss RET2000 M. Danfoss RET2000 M 13 stron. Electronic digital thermostat with lcd
Drukuj stronę
Thermostat standby
To place the thermostat into standby (off ), press the V arrow
GB
twice to enter the temperature setting mode. When in heating
mode press and hold the V arrow until the set temperature
disappears and the standby symbol appears. In cooling mode
press and hold the Λ arrow until the standby symbol appears.
When in standby the thermostat will have no control of the
heating or cooling system.
To exit standby press and hold the Λ arrow (V arrow in cooling
mode) until the required set temperature is fl ashing on the
display.
Danfoss Heating
9