Airwell 24 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Airwell 24. Airwell 24 11 stron. Had/jad/dha wall mounted range dc inverter

Drukuj stronę
INVERTER
At the start of operation, a large power is
used to bring the room quickly to the desired
temperature. Afterwards, the unit automatically
switchs to a low power setting for economic and
comfortable operation.
HORIZONTAL AIR SWING
Automatic swing of vertical louver is in horizontal
direction. The louver move automatically in right
and left direction to spread the conditioned air
evenly throughout the room.
VERTICAL AIR SWING
Automatic swing of horizontal louver is in vertical
direction. The louver moves automatically in
upward and downward direction to spread the
conditioned air evenly throughout the room.
AUTO CHANGE OVER
The operation mode (cooling, dry, heating)
is switched automatically to maintain the set
temperature, and the set temperature is kept
constant at all times.
The Wireless Remote Control Unit allows
convenient control of air conditioner operation.
DB[°C]
Upper Limit
32
Cooling
Lower Limit
21
Upper Limit
27
Heating
10
Lower Limit
Indoor
Outdoor
WB[°C]
DB[°C]
WB[°C]
23
NA
46
15
NA
-10
NA
18
24
NA
-16
-15
SLEEP TIME
When the SLEEP button is pressed during
Heating mode, the air conditioner thermostat
setting is gradually lowered during the period of
operation; during cooling mode, the thermostat
setting is gradually raised during the period of
operation, when the set time is reached, the unit
automatically turns off.
BIPOLAR IONIZER(Option)
BIPOLAR IONIZER makes the air more fresh
and more comfortable, and let you enjoy healthy
life easily.
1.The bipolar ionizer contains an integrated
cleaning and ON/OFF function. The operation is
done by movement of the cleaning pad(see the
sketch below) from left to right and back.
2.There is a flashing diagnostic indicator(LED)
to assure the ion ouput functionality. In case that
the LED is not flashing, the Cleaning Pad has to
be moved once to the right and back to the left
end position for cleaning. The cleaning should
be done in one of the following:
a. The LED stops flashing(check that the
cleaning pad is on the left which is close to
the LED position).
b. At the maintencance of your equipment.
3. Movement of the cleaning pad from left side
to right will switch the bipolar ionizer OFF
Important Notice: When the air-conditioner is
turned OFF or if the indoor fan stops operation,
the IONIZER stops automatically.
Diagnostic indicator (LED)
Bipolar ionizer sketch
Cleaning Pad