Dungs AM 41 V2.0 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Palnik Dungs AM 41 V2.0. Dungs AM 41 V2.0 16 stron.

Installation of MPA 4112 and MPA 4114

Installation on DIN rail or

Installation with 2x screw M4, length min. 20 mm

Drill mounting holes with 4.5 mm drill

Place a sealing washer or O-ring underneath to obtain the protection class IP 54.

Installation of display AM 41

For installation, create a 68 x 68 mm cut-out at the installation location.

The maximum permissible material thickness of the installation surface is 5 mm.

Use connection line AM 41 # 298790, (max. 10 m) to connect the display.

AM 41 plug assignment

Colour

White

Brown

Green

Yellow

Pin 1

9 ... 16

Grey

Pink

Blue

Red

10. Special functions

Unlock function

Pressing the unlock button allows the MPA to be unlocked when in a locked state.

Actuation time > 0.5 s < 5 s. The device can be unlocked a maximum of five times in 15 minutes.

Further unlocking is possible only after a waiting period of three minutes.

Enhanced unlock (only using the unlock button in the device)

Resetting the unlock block:

Hold the unlock button > 5 s < 10 s until the display starts flashing, then release the unlock key and press

again.

The "Enhanced unlock" function is active in all operating states of the MPA.

Pressing it during operation results in a safety shutdown and subsequent restart.

Parameterisation switch

Attention: For a factory-set MPA, the switch must be set to the "Auto" position.

For additional information, refer to the product manual

MPA 4112 and MPA 4114

MPA 4122