Danfoss APP 1.0 Instrukcja serwisowa - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Pompa wodna Danfoss APP 1.0. Danfoss APP 1.0 12 stron. Disassembling and assembling
Również dla Danfoss APP 1.0: Instrukcja obsługi (8 strony)

Drukuj stronę

Disassembling and Assembling, APP 0.6-1.0

Service guide |

4 | 180R9092 | DKCFN.PI.013.EC5.02 | 521B0739

7. Remove the cylinder barrel.

9. Gently lever the valve plate assembly free

with the aid of a screwdriver.

11. Gently press, by hand, the valve onto the

cylinder barrel.

8. Remove the port plate and guide pin.

Mount backup

ring first

Then mount

O-ring

10. Replace the O-rings and the back-up rings

on the valve plate. Mount the new back-

up rings on the new valve plate first and

then mount the new O-rings.

Wet the O-rings and back-up rings with

clean (filtered) soap water.

12. Position the port plate over the guide pin.

IMPORTANT: Make sure that the guide

pin is located in the locating hole in the

port plate

Locating hole

Guide pin