Danfoss iSave 21 Instrukcja serwisowa - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Pompa wodna Danfoss iSave 21. Danfoss iSave 21 18 stron. Energy recovery device disassembling and assembling
Drukuj stronę
Service guide
7.
Assembling the
iSave
Disassembling and assembling iSave 21
1.
Fit the steel coupling onto the shaft of the
pressure exchanger.
3.
Orient both the steel coupling and the
2 guide holes on the vane pump to fit into
the pressure exchanger.
180R9219 | 521B1171 | DKCFN.PI.003.K4.02 | 03.2016
2.
Fit the polymer coupling insert on the
steel coupling. Note correct position of
the hole in the insert.
4.
Mount the bolts into the flange and tighten
them with 30 Nm ±3 Nm.
Correct
positions
17