Danfoss PAH 12.5 PAHT 10 Demontaż i montaż - Strona 5

Przeglądaj online lub pobierz pdf Demontaż i montaż dla Pompa wodna Danfoss PAH 12.5 PAHT 10. Danfoss PAH 12.5 PAHT 10 20 stron.

Instruction

Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5

13.

Loosen the valve plate using two screw-

drivers. Place one of the screwdrivers in the

slot of the valve plate.

15.

Remove the five O-rings and the five

back-up O-rings.

17.

Wash all parts and replace all seals

(inclusive shaft seal).

19.

If the pump has failed, the reason for the

failure must be found and fixed before the

repaired pump is re-installed.

180R9095 / 521B0986 / DKCFN.PI.010.NA3.02 / 09.2013

14.

Remove the valve plate.

16.

Remove the port plate from the flange.

18.

Inspect all parts carefully (see "Inspection")

and replace any worn parts.