Danfoss PAHT 2-6.3 Instrukcja serwisowa - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Pompa wodna Danfoss PAHT 2-6.3. Danfoss PAHT 2-6.3 20 stron. Pah 2-6.3/paht 2-6.3/paht c 2-6.3 and paht g 2-6.3 disassembling and assembling

Drukuj stronę

Instruction

Disassembling and assembling PAH 2-6.3, PAHT 2-6.3, PAHT C 2-6.3 and PAHT G 2-6.3

13. Place the screw in the center hole.

Alignment

hole

Guide pin

15. Mount the pump housing using the pin

as guide.

17. Tighten the screws to a torque of 13 Nm.

180R9094 / 521B0985 / DKCFN.PI.011.N5.02 / 09.2015

14. Tighten to a torque of 10 ±1 Nm.

16. Press the housing down by hand and

insert the screws.

18. Mount the two O-rings in the flange and

the O -ring on the front cover.