Dunlop EVH117 Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pedał muzyczny Dunlop EVH117. Dunlop EVH117 2 stron.
Drukuj stronę
EVH117 FLANGER
DESCRIPTION
POWER
• Four different parameters
The EVH Flanger is powered by two
for precise fine-tuning
9 volt batteries (accessed through
the bottom of the pedal), an 18 volt
• EVH switch engages
AC adapter such as the Dunlop
"Unchained" flanger tone
ECB004/ECB004EU, or a DC
• Custom EVH paint job
™
Brick
power supply
CONTROLS
MANUAL knob controls
degree of phase shifting
WIDTH knob controls
intensity of time delay
set by SPEED knob
SPEED knob controls
speed of time delay
REGEN. knob controls
overall intensity of effect
EVH switch engages
"Unchained" mode
(indicated by yellow LED)
FOOTSWITCH toggles
effect on/bypass
(blue LED indicates on)
DIRECTIONS
• Run a cable from your guitar to
the EVH Flanger's INPUT jack
and run another cable from the
EVH Flanger's OUTPUT jack to
your amplifier.
.
• Start with all controls at 12
o'clock and the EVH switch
disengaged.
• Turn the effect on by depressing
the footswitch.
• Rotate the MANUAL control
clockwise to emphasize higher
frequencies or counterclockwise
to emphasize lower frequencies.
• Rotate the WIDTH control
clockwise to increase the
intensity of the time delay as
set by the SPEED control or
counterclockwise to decrease it.
SPECIFICATIONS
• Rotate the SPEED knob
Input Impedance
clockwise for a faster phase
Output Impedance
effect or counterclockwise
Signal to Noise*
for a slower phase effect.
Noise Reduction
• Rotate the REGEN. control
Max Delay
clockwise to increase the
Rate Range
overall intensity of the effect or
Bypass
counterclockwise to decrease it.
Current Draw
• Pushing in the EVH switch
Power Supply
(indicated by yellow LED)
engages the EVH "Unchained"
*A-weighted, 0 dB = 1 Vrms
mode, which overrides the
MANUAL, WIDTH, SPEED and
REGEN. controls with preset
values for classic EVH flanging.
470 kΩ
1 kΩ
>98 dB
2:1 ratio
12.8 ms
0.1 Hz to 10 Hz
Hardwire
35 mA
9 volts DC
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658