Danfoss 176F4060 Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Konwerter mediów Danfoss 176F4060. Danfoss 176F4060 16 stron. In-bottom/out-back cooling kit for fa11-fa12, frequency converters
Drukuj stronę
In-bottom/Out-back Cooling Kit for FA11-FA12
Installation Guide
1
2
3
4
5
6
Illustration 8: Installation of Top Cover
1
M5x14 screw
2
Top cover
3
Top gasket
2.6 Assembling the Bottom Duct
The bottom duct is a telescopic duct that collapses to simplify installation. To assemble the duct before installation, use the follow-
ing steps. Refer to
Illustration
Procedure
1.
Cut the strip of ribbed EPDM rubber seal into 2 pieces of 990 mm (39.0 in).
2.
Peel the paper off the self-adhesive seals. Place 1 strip on the outside bottom edge of the inner sleeve of the duct, and
1 strip on the upper inside edge of the outer sleeve of the duct.
10 | Danfoss A/S © 2022.12
9.
4
Top vent
5
M5x12 screw (loosened, not removed)
6
Top of frequency converter
AN361429392581en-000201 / 136R0253
Installation