Casio SHB-200 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Casio SHB-200. Casio SHB-200 15 stron.
Drukuj stronę
Hand Alignment
Correction
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, adjust hand and day indicator
alignment.
Correcting Hand Alignment
1.
Pull out the crown to the first click.
2.
Hold down (A) for about five seconds.
This enables adjustment of second and
minute hand alignment.
Second hand
Minute hand
30
3.
Rotate the crown to align the second and
minute hands with 12 o'clock.
The minute hand of this watch moves in
●
conjunction with second hand
movement.
4.
Press (A).
This enables adjustment of hour hand
alignment.
If the hand position is more than three
●
hours out of alignment, you will not be
able to use step 5 to correct it. If this is
the case, skip step 5 and go to step 6.
Next day
1
31
Today's date
Hour hand
1
31
5.
Rotate the crown to align the hour hand
with 12 o'clock.
Operation Guide 5459/5460
6.
Press (A).
If your watch does not have a small 24-
●
hour hand, this enables adjustment of
the small hour and minute hands.
If your watch has a small 24-hour hand,
●
this enables adjustment of the small
hour and minute hands, and the small
24-hour hand.
Small minute hand
7.
Rotate the crown to align the small hour
and minute hands with 12 o'clock.
If your watch has a small 24-hour hand,
●
also align it with 12 o'clock (24).
8.
Hold down (A) for about two seconds.
This enables adjustment of day indicator
alignment. If the hour hand was
misaligned by more than three hours in
step 4, you can also correct hour hand
alignment here.
9.
Rotate the crown to center the day
indicator between "1" and "31", and the
hour hand with 12 o'clock.
Note that date indicator and hour hand
●
movement are linked with each other.
10.
Push the crown back in.
Small hour hand
1
31
Small minute hand
Small hour hand
1
31
Small 24-hour hand
1
31
1
31
Day indicator
Moving To Another
Time Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
Before Boarding
●
1.
Configure the World Time (Dual Time) to
the current time at your destination.
Current time
Destination time
Configuring World Time Settings
l
Configuring Dual Time Settings
l
2.
Disable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
After Arriving
●
1.
Swap the origin time zone time with the
destination time zone time.
Model without a Small 24-hour Hand
●
Before swapping
After swapping
30
Destination time
Model with a Small 24-hour Hand
●
Before swapping
After swapping
Home City
30
Destination time
Swapping the Home City Time and
l
World Time (Dual Time)
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
Home City
30
30
11