Dunster House ATLAS P5-3050PRG Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Domki ogrodowe Dunster House ATLAS P5-3050PRG. Dunster House ATLAS P5-3050PRG 16 stron. Pergola 3.2m x 5.2m
Drukuj stronęPanel CP2 & CP9
60mm Screws
M10x110 Bolts
Step 1.
•
Position the Panels between the Posts as shown in the diagram below.
•
Join the together, using (3) 60mm screws per panel.
•
Connect the two end panels to the Posts using (3) 60mm screws per panel.
Please Note:
•
Fix the ends panel first and space the centre panel between them. (option to add sealant between the panel and
the post)
•
There maybe a gap between the panels, which is covered by the external and internal trims.
Assembly Steps for Atlas Pergola 5.2m x 3.2m
Half height wall panels assembly
2519
2279
•
•
M10 Shield Anchors
M10x28 Washers
60mm Screw
View from inside
Fix the panels into the concrete by drilling
per panel) and inserting the shield anchors into the holes.
Fix the panels by inserting M10x110mm bolts and M10 washers
and tighten until secure.
M10x110mm
bolt &washer
M10 shield anchor
n
(
16 hole 80mm deep required)
** Quantity of components will vary,
depending on your purchase.
CP9 Panel
CP2 Panel
n
16 holes 80mm deep (2
Panel
Concrete
Page 13