Dunster House HANGOVER APEX G4-1824HAB Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Domki ogrodowe Dunster House HANGOVER APEX G4-1824HAB. Dunster House HANGOVER APEX G4-1824HAB 18 stron. Bar 1.8m x 2.4m (6ft x 8ft)
Drukuj stronęG4 - 1824HAB HANGOVER APEX BAR 1.8m x 2.4m - Assembly Steps
STEP 3: ROOF SUPPORT
Items:
1x SPLIT FRONT PANEL TOP
4x ST-PT3535430
4X ST-PT3535270.30
4X ST-PT3535540.30.60
1X ST-PT15121465.120.Z
1x ST-PT15121333.30
1x ST-PT1582141.30.A
To build the Roof Support Brackets, begin by fixing ST-PT3535430 to ST-PT3535270.30
•
Using 1x 60mm Screw.
•
ST-PT3535540.30.60
•
Nail 14x 30mm Nails to the shiplaps to the side of the end brackets as shown in
the image to the right.
Ensure ST-PT15121465.120.Z is flush to the previously assembled Roof Support
•
Bracket.
Repeat the previous steps for the other side of the shed.
•
SPLIT FRONT PANEL TOP
SCREW 70 mm
** Pre-drill parts before fixing screws **
1x ST-PT15121465.120.Z.B
1x ST-PT15121333.30.B
1x ST-PT1582141.30.B
12x 60mm Screws
8x 70mm Screws
28x 30mm Nails
Fix ST-PT3535540.30.60 to the previously assembly structure, use 2x
•
60mm Screw.
Repeat 3x for the remainder of the Roof Support Brackets.
•
•
Fix the Roof Support Brackets through the Split Front Panel
Top.
•
use 2x 70mm Screws per bracket.
ST-PT3535270.30
ST-PT1582141.30
ST-PT15121333.30
ST-PT15121465.120.Z
ST-PT3535430
PIN NAIL 30 mm
Front View
ST-PT15121465.120.Z
Flush
Page 11