Dunster House H3-GS4X35HEX Instrukcja instalacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Schronienia Dunster House H3-GS4X35HEX. Dunster House H3-GS4X35HEX 17 stron. Hexagonal utopia garden shelter
Drukuj stronęPosition Roof panel support (45x20x1750.A) underneath the roof panel as shown below. Fix them by screwing from
the outside with 8x 50mm and 2x 70mm screws. Repeat this process for all 6 roof sections.
45x20x1750.A
On the base of the main support posts, fix Post trims (1x 70x35x350.C) to each post on the outside of the shelter.
The angled end of this component needs to be pointing upwards. Use 2x 70mm screws per component to fix into
position.
Follow the instructions supplied with the shingles/roof felt (optional extra) and cover the roof panels as instructed. After
that remove temporary post from the metal bracket by unscrewing it.
Once the panels are covered, fix Roof trims (6x 70x35x2170.D) in the position shown using 4x 50mm screws per
component.
70x35x350.C
70mm Screws
All dimensions are approximate and subject to the limitations of the material used and the methods of manufacture
Step 6 - Fixing Roof supports and Post trims
View from underneath
Step 7 - Fixing Post trims, Shingles and Roof trims
70x35x2170.D
50mm Screws
70mm Screws
Page 8