Casio fx-7400G PLUS Dodatek - Strona 9

Przeglądaj online lub pobierz pdf Dodatek dla Kalkulator Casio fx-7400G PLUS. Casio fx-7400G PLUS 15 stron. Chapter 9 - data communications
Również dla Casio fx-7400G PLUS: Katalog produktów (16 strony), Podręcznik użytkownika (13 strony), Specyfikacje (1 strony), Specyfikacje (1 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (15 strony), Instrukcja obsługi (13 strony), Korzystanie z (2 strony)

Drukuj stronę
Casio fx-7400G PLUS Dodatek
Message
Stk ERROR
Mem ERROR
Arg ERROR
Dim ERROR
Com ERROR
Transmit
ERROR!
Receive ERROR!
Memory Full!
Meaning
•
Execution of calculations that
exceed the capacity of the stack
for numeric values or stack for
commands.
1 Not enough memory to hold
function input in the Graph
Mode for graph drawing.
2 Not enough memory to hold
function input in the TABLE
Mode.
3 Not enough memory to store
data in list function.
•
Incorrect argument specification
for a command that requires an
argument.
•
Illegal dimension used during
list calculations.
•
Problem with cable connection
or parameter setting during
program data communications.
•
Problem with cable connection
or parameter setting during
data communications.
•
Problem with cable connection
or parameter setting during
data communications.
•
Memory of receiving unit
became full during program
data communications.
Countermeasure
•
Simplify the formulas to keep
stacks within 10 levels for the
numeric values and 26 levels
for the commands.
•
Divide the formula into two or
more parts.
123
•
Keep the number of variables
you use for the operation within
the number of variables
currently available.
•
Simplify the data you are trying
to store to keep it within the
available memory capacity.
•
Delete no longer needed data
to make room for the new data.
Correct the argument.
n
n : n
•
Fix
, Sci
= integer from 0
through 9.
n
n
n
•
Lbl
, Goto
:
0 through 9.
•
Check list dimension.
•
Check cable connection.
•
Check cable connection.
•
Check cable connection.
•
Delete some data stored in the
receiving unit and try again.
Appendix
= integer from
201