Duo-Therm 3109228.001 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Termostat Duo-Therm 3109228.001. Duo-Therm 3109228.001 9 stron. Duo-therm comfort control center
Drukuj stronę
DUO-THERM COMFORT CONTROL CENTER
The Comfort Control Center allows you the freedom of controlling your vehicle's temperature to provide you with a comfortable
environment to enjoy your life-style. With just a few simple steps, you can control which mode of operation you will use, the vehicle
temperature and the fan speeds.
A. FAN ONLY MODE OF OPERATION
1. Begin by placing the power switch on the lower right
hand edge of the Control Center on the ON position. To
do this, simply move the lever to the right.
2. Momentarily depress and release the MODE push-
button until the FAN ONLY indicator on the Liquid
Crystal Display (LCD) is illuminated.
3. Momentarily depress and release the FAN push-
button until the desired fan speed indicator (LOW,
MED, HIGH, AUTO) is illuminated. If your vehicle is
equipped with a heat pump or a dual basement air
conditioning system, your selection choice will be
LOW, HIGH or AUTO.
4. After approximately 5 seconds, the selected fan
speed will come on. The MODE and FAN speed you
have selected will remain shown in the LCD area of the
Control Center until you change your selection.
5. If your vehicle contains more than one ZONE, depress
the ZONE push-button to select ZONE 2, and repeat
procedures from step two above. Repeat entire proce-
dure for each additional zone.
B. COOLING MODE OPERATION
(To set cooling temperatures and fan speeds on Duo-
Therm Air Conditioners & the cooling mode of Duo-
Therm Heat Pumps)
1. Momentarily depress and release the MODE push-
button until the COOL indicator on the LCD is illumi-
nated.
2. Depress and release the FAN push-button to select
your desired fan speed (LOW, MEDIUM, HIGH or
AUTO). If your vehicle is equipped with a heat pump or
a dual basement air conditioner system, your selec-
tion choice will be LOW, HIGH or AUTO.
3. Depress and release the UP push-button to increase
the temperature or the DOWN push-button to de-
crease the desired temperature. The final selected
SET-POINT will be displayed in the LCD area of the
Comfort Control Center.
4. After a delay of approximately 2 minutes the air
conditioner's compressor will come on and the cooling
process will begin. Once the room temperature reaches
the selected SET-POINT, the compressor will cycle
off. Once the Comfort Control Center senses the need
for cooling, the compressor will restart in approxi-
mately two minutes. At this point, the fan will either:
a.continue to operate in the single selected fan speed
or,
b.cycle OFF and ON with the compressor if the AUTO
fan speed has been selected.
OPERATING YOUR
3
HIGH
MODE
FAN ONLY
FAN ONLY
ZONE 1
ZONE 1
5. If your vehicle contains more than one ZONE, depress
the ZONE push-button to select ZONE 2, and repeat
procedures from Step 1. Repeat entire procedure for
each additional zone.
LOW HIGH
LOW HIGH
MED AUTO
MED
AUTO
72
°F
SET POINT
MODE
COOL
ZONE 1
ZONE 1
2
MODE
FAN
3
UP
TEMP
DOWN
ZONE
OFF
OFF
ON
ON
1
1
MODE
FAN
2
UP
3
TEMP
DOWN
ZONE
OFF
OFF
ON
ON