AUDIOBYTE Hydra Z Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów AUDIOBYTE Hydra Z. AUDIOBYTE Hydra Z 11 stron. Usb audio bridge

AUDIOBYTE TECHNOLOGIES

HYDRA Z UPDATE PROCEDURE

The Hydra Z can be easily updated via the it's usb input. All that is needed is to play bitperfect

the

special

wav

http://audiobyte.net/products/hydra-z

the wav file from the zip. You need to play the file bitperfect (without any fade-in or fade out, or any

kind of volume processing). A reliable way to do it is via Foobar2000, via Kernel Streaming or

WASAPI. The volume on Foobar must be set at maximum (0 dB). The update will not happen

in 2 conditions :

1) If playback is not bitperfect

2) If the internal version of the Hydra Z is the same with the version of the wav file.

Assuming that version is different and playback is bitperfect, when the file is played, the

update will start and the pcm and dsd leds from the front panel will start to flash alternatively

during the procedure. When update is done, both leds will remain on. The Hydra must be manually

restarted to initialize with the new firmware.

Note : in case the update starts (pcm and dsd leds will flash alternatively) but in the end they will

not remain on, but will continue to flash even if the update track is terminated, the update is not

successful. This means probably your playback software is fading out the volume, not allowing

the confirmation marker to pass through. You need to change your playback setup or settings of

your player.

USB Driver Installation Details (Windows XP 32/64, Windows 7 32/64)

Do not connect the USB cable to the computer before driver installation. If you have already

connected the board to the PC, click Cancel on the screen that has showed up and remove the USB

cable.

1. Go to product's page : http://audiobyte.net/products/hydra-z

2. Download the Hydra Z Win XP, W7, W8, Vista compatible drivers.

3. Unpack zip archive.

4. Enter your OS folder.

5. Launch Setup32.exe for 32bit OS or Setup64.exe for 64bit OS.

6. After the application launches, click Next:

update

track

and download the file under the "Latest Firmware". Extract

provided

the

HYDRA Z Owner's Manual

product

page.

First