Free The Tone ARC-4 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt nagrywający Free The Tone ARC-4. Free The Tone ARC-4 16 stron. Audio routing controller
Również dla Free The Tone ARC-4: Procedury aktualizacji oprogramowania sprzętowego (18 strony)
Drukuj stronę
Setting whether to Transmit Each Function's MIDI Control Change Number when Presets are Switched (CC-TX): ON/OFF switch 5
CC-TX
ENTER
Turn the PARAMETER encoder to select ON or OFF.
Parameter: ON, OFF (default = OFF)
NOTE
In addition to the MIDI control change number set by CSW, the MIDI control change number assigned to each function by the (CC-NM): ON/OFF switch 4 can be sent if this function is
turned on.
Showing Bank Title on 12-DIGIT LED DISPLAY/LDP-1 (option) (EX-DP): ON/OFF switch 6
EX-DP
ENTER
Turn the PARAMETER encoder to select ON or OFF.
Parameter: ON, OFF (default = ON)
NOTE
Turn on this setting when you connect the 12-DIGIT LED DISPLAY/LDP-1 (option) to the ARC-4 via MIDI and show the titles of banks or presets you've set.
Setting MIDI OUT/THRU Terminal (OT/TH): ON/OFF switch 7
OT/TH
ENTER
Turn the PARAMETER encoder to select the terminal's function.
Parameter: OUT, THRU (default = OUT)
NOTE
When set to THRU, MIDI signals received at the MIDI IN terminal are output intact. The MIDI signal stored in each preset will not be output by pressing the PS/L switch on the ARC-4.
Setting MIDI Program Change Number's Start Number: ON/OFF switch 8
ST-NM
ENTER
Turn the PARAMETER encoder to select the desired start number.
Parameter: 000 (000 to 127), 001 (001 to 128) (default = 001)
NOTE
The start number of MIDI program change number differs according to MIDI devices. The ARC-4 can set the start number in accordance with the connected device.
18
CC-TX
OFF
PARAMETER
ENTER
ON
EX-DP
PARAMETER
ENTER
OUT
OT/TH
PARAMETER
ENTER
001
ST-NM
PARAMETER
ENTER
CSW/TAP: PS5/L5 switch
Detailed setting of CSW (CC#) and TAP tempo information setting is done in these configuration modes.
Setting MIDI Control Change Number to be Sent using CSW Switch (CS-CC): ON/OFF switch 1
CS-CC
CSW1
ENTER
PARAMETER
ENTER
Turn the PARAMETER encoder to select the CSW switch to which you want to enter the data.
Turn the PARAMETER encoder to select the MIDI control change number to be sent.
Turn the PARAMETER encoder to select the MIDI channel to which the MIDI control change number will be sent.
Parameter 1: CSW1 to CSW8
Parameter 2: 000 to 120, OFF (default = OFF)
Parameter 3: CH01 to CH16 (default = CH01)
NOTE
The MIDI channel when sending a MIDI control change number can be selected from CH01–16. The ARC-4 can send up to eight MIDI control change numbers simultaneously.
Setting Operation Type of CSW Switch (CS-TP): ON/OFF switch 2
CS-TP
CSW1
ENTER
PARAMETER
Turn the PARAMETER encoder to select the CSW switch whose operation type you want to set.
Turn the PARAMETER encoder to select the desired operation type.
• This defines the operation type of the CSW set by the (CS-CC) item.
• The operation type is selected from LATCH, MOMENTARY1, MOMENTARY2, ON SEND, and VALUE.
• If VALUE is selected, set the value sent when VALUE CSW (CC#) is turned on and off. If "NON" is selected for the OFF setting, nothing is sent in OFF status.
Parameter 1: CSW1 to CSW8
Parameter 2: LATCH, MOMENTARY1 [MOM1], MOMENTARY2 [MOM2], ON SEND, VALUE (default = LATCH)
Details of MIDI Data Sent When CSW is Turned On/Off p.29
Setting Footswitch Assigned to TAP Tempo Input (TP-FS): ON/OFF switch 3
TP-FS
OFF
ENTER
PARAMETER
ENTER
ON
OFF
PARAMETER
ENTER
PARAMETER
Turn the PARAMETER encoder to select the footswitch to be used.
Turn the PARAMETER encoder to set the MIDI control change number to be transmitted.
Turn the PARAMETER encoder to set the MIDI transmit channel.
Turn the PARAMETER encoder to set the value for the ON status.
Turn the PARAMETER encoder to set the value for the OFF status.
Parameter 1: OFF, MODE, MUTE, PS1 to PS7, E1 to E4 (default = OFF)
Parameter 2: 000 to 120 (default = 000)
Parameter 3: CH01 to CH16
Parameter 4 (value for ON status): 000 to 127 (default = 127)
Parameter 5 (value for OFF status): NONE, 000 to 127 (default = NONE)
OFF
CH01
PARAMETER
ENTER
PARAMETER
ENTER
LATCH
CSW1
ENTER
PARAMETER
ENTER
OOO
CH01
PARAMETER
ENTER
PARAMETER
ENTER
TP-FS
ENTER
CSW1
19