Duolabs Qbox One Skrócona instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Odbiornik Duolabs Qbox One. Duolabs Qbox One 15 stron. Dvb-s sat receiver

Must be 12

Set to 00800 for Terrestrial Scan

Terrestrial Scan Setup

Frequency to scan in Mhz

Find Terrestrial Channels – If your QBox is

provided with DVB-T tuner (please check out

your system configuration) it will start scanning

the pre-installed frequencies of Terrestrial

Transponders.

If some services are not found you can either

do a Manual Frequency Scan. As it will follow

on the next slide.

Once the Scan is completed a Scan report will

show up.

Manual Terrestrial Transponder Scan – With

this function you can manually scan each

Terrestrial

specific

automatic scan will skip it or it is simply not listed.

Enter the Menu button:

Setup

<OK>

Service Searching

Manual Transponder Scan

Move with the Remote Control over the frequency

and set the first 2 digits to 12 and on the other 3

digits set the frequency you want to scan like in

the example 826.

Set the Symbol rate to 00800 this will tell the STB

to set the terrestrial tuner.

Let all the other settings as is.

Press <Start Scan> button.

Scan Completed.

When the scan will be completed a report of

found channels will be prompted on the screen.

frequency

case

<OK>

the