AudioCodes MP-100 Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Gateway AudioCodes MP-100. AudioCodes MP-100 17 stron.
Drukuj stronę
AudioCodes™ MP-100/104 Gateway Quick Start Installation Guide
Configuring the MP-104
Once the BootP Client is set up, configure the MP-104 in the AudioCodes Web administrator.
To configure the MP-104:
1.
Open the Web browser and enter the IP address of your MP-104 gateway in the Address
field. Then, press ENTER. The following home page appears.
NOTE:
The IP address can be found in the IP field in the Client Configuration dialog,
shown on
page
7.
2.
When the login dialog box appears, enter the username and password. The default user-
name and password are both Admin (case-sensitive). If you are unable to log on, verify
that the Client Configuration is set up correctly (see
3.
The MP-104 has the following options:
•
Quick Setup (see
•
Protocol Management (see
•
Advanced Configuration (see
•
Status and Diagnostics (see
•
Software Update (see
•
Save Configuration (see
•
Reset (see
page
To configure the settings, click any of the options and follow the instructions on the fol-
lowing pages.
NOTE:
Make sure that the Call Agent IP address in the Advanced Configuration - Pro-
tocol Management page matches the IPRC IP address (see
page
10)
page
11)
page
12)
page
15)
page
16)
page
16)
16)
March 2004
page
7).
page
11).
Page 9 of 17