Free2Talk Sun-Lite Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria samochodowe Free2Talk Sun-Lite. Free2Talk Sun-Lite 2 stron.

Drukuj stronę

7. Using the Carkit

(1) Answering a Call: To answer an incoming call, press the

"MFB" button once.

(2) Ending a Call: To end an active call, press the "MFB" button

once to end the call.

(3) Reject a Call: Hold the "MFB" button for 3 seconds and the

incoming call will be rejected.

(4) Voice Dial (*Handset Dependent): In standby mode, press

the "MFB" button once and call out the name of the person for

the call to be placed.

(5) Redial Last Outgoing Number: Press the "MFB" button

twice for last number redial.

(6)Mute & Un-mute the Microphone: Toggle between Mute

and Un-mute by pressing the "MUTE" button. The red LED light

indicator comes on when the device is in mute.

(7) Transferring Calls Between Carkit and Mobile Phone:

During a call, press both "+" and "-" buttons together, and the

call is routed to your mobile phone. Repeat the process to

route the call back to your Carkit.

(8) Answering 2

Incoming Call: Press the "MFB" button twice

to answer the incoming call and the 1

call will be put on hold.

To swap between calls, simple press the "MFB" button twice.

(9) Adjusting the Volume: During a call, press the "+" and "-"

buttons repeatedly until you reach the desired volume level.

8. Multipoint Feature (Pairing with 2 Mobile Phones

Simultaneously)

The default setting of your Carkit's Multipoint function is

turned off.

• To activate Multipoint: In standby mode, press and hold "+"

button for 3 seconds until you hear a beep. Multipoint is turned

on and your Carkit will automatically connect itself to the last 2

previously paired devices.

• To de-activate Multipoint: In standby mode, press and hold

"-" button for 3 seconds until you hear a beep. The Carkit will

automatically turn itself off. When the Carkit is powered on the

next time, it will only connect itself to the last connected

device.

(1) Multipoint Pairing

• Follow the "Pairing Carkit with Mobile Phone" procedure to

pair your carkit with the primary mobile phone.

• Turn off the Carkit and repeat the "Pairing Carkit with Mobile

Phone" procedure with the secondary mobile phone.

• On the primary mobile phone's menu, activate the Bluetooth

connection with the Carkit and the process is completed.

(2) Multipoint Redialing and Voice Dialing

• On Primary Connected Mobile Phone: Same instruction set

listed in "Using the Carkit"

• On Secondary Connected Mobile Phone: Utilizes the "+"

button instead "MFB" button to activate the same feature set.

Note: Whenever an incoming or outgoing call is made on either

the primary or secondary mobile phone, the Carkit will

temporarily disconnect the connection of the inactive mobile

phone. Connection is automatically resumed when the call

ends.

9. Restore to Default Settings

To restore your Carkit to its original settings, press and hold

both "+" and "-" buttons for 10 seconds until the blue LED light

indication flashes rapidly. Please note that all previously paired

devices will be erased from its memory.

10. Care and Maintenance

(1) Do not expose the Carkit to liquid, moisture or humidity, as

it is not waterproof.

(2) Do not use abrasive cleaning solvents to clean the Carkit.

(3) Do not expose the Carkit to extreme temperatures.

(4) Do not expose the Carkit to contact with sharp objects as

this will cause scratch/damage the surface.

(5) Do not attempt to disassemble the Carkit, as it does not

contain serviceable components.

(6) If you do not use the Carkit for long periods of time, be sure

to store it in a dry place, free from extreme temperatures,

humidity and dust.

11. Product Specifications

• Bluetooth Compliance: Bluetooth 2.1 + EDR specifications

• Operating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed

ISM band

• Output Power: Class 2 Power Output, up to 10 meters

• Support Profiles: Headset and Handsfree 1.5 Profiles

• Full Duplex Audio Quality with echo cancellation

• Standby Time: Up to 500 hours

• Talk time: Up to 11 hours

• Battery Charging Time: 2 hours (car charger), +- 12 hours

(on solar cell)

• Charging Voltage: DC5.0V 400mA

• Battery Type: 550mA (Rechargeable Lithium Battery)

• Dimensions: 92.5 x 54 x 15.5 mm

• Weight: 60g (without windshield mount), 69g (with

windshield mount)

12. Safety Information

(1) Check local laws regarding use of a mobile phone and

Carkit while driving.

If you use the Carkit while driving, ensure your attention and

focus remains on your responsibility to drive safely.

(2) Never allow children to play with the Carkit. Small parts

may be a choking hazard.

(3) Observe all signs that require an electrical device or RF

radio product to be switched off in the designated areas. These

could include hospitals, blasting areas, and potentially

explosive atmospheres.

(4) Do not use your Carkit in an aircraft.

(5) We recommend that if the car will be stationary for a long

period, the Visor unit should be removed to avoid theft.

13. Troubleshooting

(1) The Hands Free has locked up (frozen): In the case of this

unit locking up rendering all of the buttons inoperable simply

plug the device into the charger supplied and the unit will

unlock and operate as per normal.

(2) I have further unanswered questions regarding this device,

you have 2 choices:

• Log onto the support forum on our website

www.free2talk.com.au/support where we will be more than

happy to assist you in troubleshooting your Free 2 Talk

product.

• Call the Free 2 Talk help desk on 1300 365 047.

14. Product Warranty Policies

Free2Talk warrants the product to be free from defects in

materials and workmanship for a period of two years from the

date of shipping. In the event that any of Free2Talk's Products

are proved to Free2Talk's satisfaction to have been defective,

Free2Talk will repair or replace (at Free2Talk's discretion) this

product or any defective parts. Specifically exempt from

warranty are limited-life consumable components subject to

normal wear and tear, such as microphones, ear cushions,

modular plugs, suction pads, decorative finishes, batteries,

and other accessories.

15. Disclaimer

Whilst every effort has been made to ensure that the

information in this manual is accurate and complete, no

liability will be accepted for any errors and/or omissions made.

Free2Talk reserves the right to make changes and

improvements to the specifications and features of the

hardware and firmware of the products described in this

document without prior notice. Reproduction, transfer,

distribution or storage of part or all of the contents in this

document in any form is prohibited without prior permission of

Free2Talk. All trademarks acknowledged.