AudioCodes 400 Series Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Telefon IP AudioCodes 400 Series. AudioCodes 400 Series 2 stron. Restoring phone to factory defaults
Drukuj stronęRestoring Defaults Using the Phone's Screen
To restore the phone's factory defaults using the phones screen:
1. Press the Menu key
2. Scroll down to Administration and press OK
3. Enter the Admin password (default 1234) followed by OK
4. Scroll down to Restore Defaults and press OK
5. A warning screen will ask you to confirm – press the Yes softkey.
Restoring Defaults Without Needing Access to the Administration Menu or Access
to the Web Interface.
In some rare cases you may find that you are unable to access the web interface of the phone, the buttons
on the phone may be unresponsive or you do not know the Administrator password.
In this case you can restore defaults by following these steps:
1. Press the OK + MENU keys simultaneously.
2. While keeping them pressed, unplug the power cable or ethernet LAN cable if POE is used.
3. Plug the power cable or LAN cable back into the phone while continuing to press the OK + MENU
keys for about 5 seconds.
4. Release the OK + MENU keys. The phone's settings are restored to their defaults.
For any further questions regarding this topic or other technical topics:
Contact your AudioCodes Sales Engineer
•
Visit our AudioCodes Services and support page at
•
Access our technical documentation library at
•
Access to AudioCodes Management Utilities is available at
•
Contact Technical Support to submit a support ticket at
•
https://www.audiocodes.com/services-support
https://www.audiocodes.com/library/technical-documents
https://services.audiocodes.com/app/answers/detail/a_id/20
https://services.audiocodes.com
INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED TO THE BEST OF AUDIOCODES KNOWLEDGE, AND
AUDIOCODES SHALL NOT BE HELD LIABLE FOR ANY INACCURACIES
Quick Reference Guide
.