AudioCodes HRS Podręcznik szybkiej konfiguracji - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Telefon IP AudioCodes HRS. AudioCodes HRS 4 stron.

Connect the L-shaped end of the splitter power cable to the phone's DC 12V power port and the

straight end to the HRS-458 speaker. Connect the two-prong adapter directly to the electrical wall

outlet.

5. Connecting Speaker to Phone

•

[See previous page] Connect speaker 1's USB cable to the phone's USB port 1.

6. Upgrading Firmware

 To upgrade firmware if prompted:

upgrade the speaker's firmware, touch the Yes softkey; progress is indicated; the idle screen opens.

Note:

If the update is interrupted, the 458 speaker will not be usable. It will only exit 'upgrade

mode' and resume operational mode when the update is successfully completed.

7. Conferencing

 To initiate a meeting:

participant in the conference. Touch Add, enter Donald's number and touch Dial; Donald answers.

Touch Add to add another participant to the conference meeting.

To mute all:

[See below] Touch Mute All or touch Call Menu and then select Mute All.



 To change a participant's privileges:

In the Conference screen, touch Call Menu and then Make Hilary attendee [see below left]

 To mute a participant:

changes to muted.

If, after connecting speaker to phone, you're prompted to

In the idle screen, touch Meet Now; you're prompted You are the only

[Attendee can only add participants | Host can do everything]

[See below center] In the Conference screen, touch their unmuted icon; it