Dupla pH-Control Pro Instrukcje użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Przyrządy pomiarowe Dupla pH-Control Pro. Dupla pH-Control Pro 20 stron.

5.2 pH programming

Note: The pH control is an alternative programming for temperature 1 in slot 1.

After acknowledging flashing

If you want to programme the pH Set point, press

tions .

If you want to activate the night off function press another time the ▼, button until

pressing the

button . Continue making your settings with item 5 .3 .2 of this instructions .

If you want to programme the pH alarm, press the ▼ button again until

button . Proceed making your settings with item 5 .2 .3 of the instructions .

If you want to (de)activate the audible alarm function, press the ▼ button again until

pressing the

button . Proceed making your settings with item 5 .2 .4 of the instructions .

If you want to calibrate your pH-Electrode, press the ▼ button to select CAL and confirm by pressing the

button . Proceed making your settings with item 5 .2 .5 of the instructions .

If you want to (de)activate the pH Calibration reminder, press the ▼ button again until CAL and

by pressing the

button . Proceed making your settings with item 5 .2 .6 of the instructions .

5.2.1 pH set point programming

When

or your last set value and pH are flashing, press the

When

flashes, press the

When

or your last set value flashes, use the ▲ or ▼ button to set the desired pH value between

and acknowledge with

Please note: The pH Set Point presetting is

or lower values could be required.

, pH is displayed and SET flashes .

button to confirm .

. Proceed making your settings as in item 5 .2 .1 of the instruc-

flashes and confirm by pressing the

button to set the pH point .

. Depending on water values where your fish come from, higher

flashes and confirm by

flash and confirm

and