AudioControl ACX-300.1 Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wzmacniacz AudioControl ACX-300.1. AudioControl ACX-300.1 10 stron. Compact high power all-weather 2-channel amplifier
Również dla AudioControl ACX-300.1: Skrócona instrukcja obsługi (12 strony)
Drukuj stronę
Cover Plate Removal
The cover plate must be removed to gain access to
the controls, and then sealed again to protect the
controls against moisture and debris.
OUTPUT
Removal Procedure
1. Locate the top six hex screws that hold down
the sealed top cover.
2. Use a 2.5mm hex wrench to remove the six
+12V
screws.
GND
3. Gently lift cover off. It's a very tight fit there, so
you may need to use some gentle force. Yes, it is
REM
with you!
4. Keep the cover plate and screws in a safe and
handy place, until you have finished adjusting
the controls to your immense satisfaction.
9