AUDIOCORE AC890 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Głośniki AUDIOCORE AC890. AUDIOCORE AC890 7 stron.
Drukuj stronę
EN Bluetooth speaker
CONTENTS: Bluetooth speaker, Micro USB charging cable, 3.5mm audio cable,
shoulder strip, user guide
FUNCTIONS:
01. Status LED
02. Micro USB charging port (DC 5V)
03. USB drive slot
04. Press Previous (track/station)
Press & Hold Volume down
05. Play/Pause/FM scan
BT MODE:
1. Turn Power to ON location to turn on the speaker. Till LED indicator lights in blue
quickly and a tone sounds, the speaker is in Bluetooth pairing mode.
2. Turn on Bluetooth function of the cell phone and search available devices. When AC890
found, select it from the list to pair with the speaker. A tone sounds and LED indicator
lights in solid blue, and the speaker now is connected successfully with the cell phone.
3. If the speaker can't be connected with the cell phone, turn off the speaker and
Bluetooth function of the cell phone, and then repeat step 1-2.
4. Play music in player and LED indicator lights in blue slowly.
5. Turn Power to OFF location and LED indicator shuts off and the speaker is turned off.
6. The speaker will auto link with last connected cell phone after the speaker powered on
again. If the speaker needs to be connected with another device, please disconnect the
speaker with the connected device firstly.
USB/TF MODE:
1. After the speaker is powered on, insert Micro-SD card/USB drive into slot and a tone
sounds and the speaker is will play music from Micro-SD card/USB drive.
2. The speaker will switch to Bluetooth mode automatically once Micro-SD card/USB
drive is taken out.
AUX MODE:
1. After the speaker is powered on, connect one end of 3.5mm audio cable to AUX IN and
a tone sounds and connect another end of 3.5mm audio cable to the cell phone. Play
music in player and control all functions by the cell phone.
2. The speaker will switch to Bluetooth mode automatically once 3.5mm audio cable is
taken out.
02 I
06. Press Next (track/station)
Press & Hold Volume up
07. Mode switch
08. Power ON/OFF
09. AUX IN
10. Micro-SD card slot
FM MODE:
1. After the speaker is powered on, press Mode and a tone sounds. Press Play/Pause for
1 second and the speaker is searching FM channels automatically and keeping available
channels.
2. Press Mode again and the speaker will switch to Bluetooth mode.
CHARGING THE SPEAKER:
1. When the speaker prompts a sound during play, the speaker needs charging.
2. Connect small end of Micro USB charging cable to the speaker and big end to USB port
of a computer, and LED indicator lights in red, and the speaker now is in charging mode.
When the speaker is charged fully, LED indicator will shut off. Do not use the speaker
during charging.
WEEE STATEMENT:
The electrical and electronic equipment are part of a selective collection. Do not throw
electrical or electronic equipment away with unsorted municipal waste, but ensure that it
is collected separately.
FCC CAUTION:
1. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
2. This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
3. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
I 03